Introducción

This guide explains the teardown of the GPS Garmin Nuvi 200.

The guide shows the parts of the device, and which of those parts are replaceable. Note that Ifixit also provides repair guides for the battery, LCD screen, speaker, and rear casing.

Este desmontaje no es una guía de reparación. Para reparar tu Garmin Nuvi 200, utiliza nuestros manuales de servicio .

  1. Top left: back casing
    • Top left: back casing

    • Top right: front casing

    • Middle left: speaker. Part ($29) and service at portatronics.com

    • Middle right: motherboard

    • Bottom left: battery. Part ($5.20) at amazon.com

    • Bottom right: LCD screen. Assembly kit ($49) at portatronics.com

    Agregar Comentario

  2. The Serial Number Strip is at the base of the device. Remove it to two expose two T5 Torx screws.
    • The Serial Number Strip is at the base of the device. Remove it to two expose two T5 Torx screws.

    • Using the T5 Torx screwdriver, remove the two T5 Torx screws.

    Agregar Comentario

    • Use care. Do no break apart the strip of orange tape that connects the LCD screen and motherboard (red box in third picture.)

    • Using the plastic opening tool, only at the bottom of the device, separate the back panel from the front panel.

    Agregar Comentario

    • Use care. The glass on top of the screen is delicate.

    • Using the plastic opening tool, push apart the clasps holding the LCD screen in place.

    • Wedge the plastic opening tool between the LCD screen and the metal frame of the device.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Hold the blue wire from its connector head.

    • Pull the connector head out of the outlet to unplug the speaker.

    Agregar Comentario

    • Using the Phillips #PH00 screwdriver remove the three screws that hold the motherboard in place.

    • Use Screwdriver bit #PH00 in IFixIt's Tool Kit to take out the three screws holding the motherboard in place.

    Agregar Comentario

    • Peel the strip of orange tape from the white attachment bar on the motherboard.

      • This detaches the motherboard and LCD Screen (see second picture for blue box).

    Agregar Comentario

    • Remove the strip of orange tape from the LCD screen to detach the LCD screen from the front casing.

    Agregar Comentario

    • Prop the motherboard up.

    • Hold the red and green wires from the connector head.

    • Pull the connector head out of the outlet to detach the motherboard from the back casing.

    Agregar Comentario

    • Use care. The back casing and battery are glued together. Do not puncture the battery.

      • Push the flat end of the spudger under the battery and separate the battery from the back casing.

    Agregar Comentario

    • Using the Phillips #000 screwdriver remove the two screws holding the speaker in place.

    • Remove the speaker.

    Agregar Comentario

Kasey Gray

Miembro Desde 28/10/13

200 Reputación

1 Guía escrita

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 24

Últimos 30 Días: 89

Todo El Tiempo: 10,053