Qué necesitas
-
-
Free the top by unscrewing the 2 screws in the front shiny cupwarmer section and the 2 screws in the plastic part in the back.
-
Carefully take off the top to reveal the inside of the Gaggia.
-
Be sure to unplug the power cord before working on your Old White Coffee Gaggia!!
-
-
-
Here you see the water intake hose, sucking water from out of the water tank and delivering it to the water pump.
-
The hose connects to the pump at its bottom side, so you can't quite see it.
-
The hose is secured to a black plastic piece in the bottom of the case by a metal clip that can be loosened with pliers.
-
Take off the hose and be careful not to lose the metal clip!
-
You can't take off both endings yet as the end that goes into the pump is still hidden!
-
-
-
-
Very dirty but functional, this is where the power cable is connected to all the wires we just freed.
-
You will only need to take out the cables on the right (bottom side on the picture), starting with the 3 from the power cable. (ground, brown and blue)
-
Unscrewing the whole luster terminal can make your life easier here.
-
-
-
The vibratory water pump sits on a rubber fitting.
-
Unscrew both screws to free the pump.
-
Take out the whole pump/fitting assemby.
-
Unfortunately, the black rubber thing on the bottom of the pump originally connecting to the high pressure teflon hose is broken, be careful with this piece as there may not be a replacement!
-
-
-
Return to the inside of the machine and unscrew the 4 screws at the top of the boiler. Be careful not to strip the screws!! Gently pull the top of the boiler off.
-
Prepare to be grossed out.
-
Somewhere below the white/brownish stuff in the 3rd picture there is a black gasket hiding. Can you find it?
-