Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Herramientas Destacadas en este Teardown

Introducción

Showing how A Fitbit Charge HR is taken apart

Este desmontaje no es una guía de reparación. Para reparar tu Fitbit Charge HR, utiliza nuestros manuales de servicio .

  1. Take the 4 Screws out of the Sides you  will need a T3 star Screw Driver
    • Take the 4 Screws out of the Sides you will need a T3 star Screw Driver

  2. El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

    El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora
  3. You Pry out the Main board you can see the Metal Hooks You Pry out the Main board you can see the Metal Hooks
    • You Pry out the Main board you can see the Metal Hooks

  4. You can Then pull out the Screws from around the Screen
    • You can Then pull out the Screws from around the Screen

Bradley Nelson

Miembro Desde 08/03/16

56 Reputación

1 Guía escrita

Can the battery be replaced?

Rick - Contestar

Mine was just over a year old (barely out of warranty) when it died. The Fitbit folks were kind enough to replace it anyway once I expressed my displeasure. I'd haggle with them a bit before going the DIY route but I'm definitely keeping my old one for spare parts. Hopefully someone will point out an aftermarket battery source before I need to do that.

fragmasterflash - Contestar

The screws in mine were Torx T-2, not T-3.

Jake McIvor - Contestar

The button is stuck in my ChargeHR. I bought the T3 screwdriver and it is too big. Either the screws are T2 or my screwdriver is too much imprecise.

Anyone fixed a stuck button?

Anderson Maciel - Contestar

it definitely not T3 must be T2

Marc Frederick - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 11

Ultimos 30 días: 38

Todo El Tiempo: 22,862