Este desmontaje no es una guía de reparación. Para reparar tu First alert smoke and carbon monoxide alarm, utiliza nuestros manuales de servicio .

  1. Insert wisdom here.
    • Insert wisdom here.

  2. You're going to want to get a flat head screwdriver and pry open the clip on the inside to get to the inner part of the alarm.
    • You're going to want to get a flat head screwdriver and pry open the clip on the inside to get to the inner part of the alarm.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. After the last step  you can now see the inside.
    • After the last step you can now see the inside.

  5. Now what you should do is pop a small screwdriver into the rivet hole to unlock the battery holder. Now what you should do is pop a small screwdriver into the rivet hole to unlock the battery holder.
    • Now what you should do is pop a small screwdriver into the rivet hole to unlock the battery holder.

  6. Now with the  the battery back area being popped out you can safely take out the ringer and the mother board of the smoke detector.
    • Now with the the battery back area being popped out you can safely take out the ringer and the mother board of the smoke detector.

    • Electricity works in a smoke detector by detecting smoke via a air filtration tank and when it detects the smoke it send a electric signal to a air horn to beep every 3-5 seconds.

Justin Lyons

Miembro Desde 21/04/18

142 Reputación

1 Guía escrita

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 34

Todo El Tiempo: 605