Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Herramientas Destacadas en este Teardown

Este desmontaje no es una guía de reparación. Para reparar tu DualShock 4, utiliza nuestros manuales de servicio .

  1. Begin by removing the screws  in the back of the controller. Begin by removing the screws  in the back of the controller. Begin by removing the screws  in the back of the controller.
    • Begin by removing the screws in the back of the controller.

    you need to open up the 2 tabs near the USB port to removed the top cover after removing the 4 screws in the back.

    Clarence Kong - Contestar

    This is nowhere near enough information. Removing the four screws gets nothing off, and no idea what “2 tabs” the above comment is talking about. The controller would stay together completely with or without the screws…

    Manjushri - Contestar

  2. Remove the analog sticks and motors. Remove the analog sticks and motors.
    • Remove the analog sticks and motors.

  3. Remove the top layer PCB. The PCB must be popped out of place and then angled in such a way that the trigger buttons at the top of the controller slide out of their slots.
    • Remove the top layer PCB. The PCB must be popped out of place and then angled in such a way that the trigger buttons at the top of the controller slide out of their slots.

  4. Remove the second layer PCB. This simply pops out of place.
    • Remove the second layer PCB. This simply pops out of place.

  5. Flip over the second layer PCB. Remove the battery from its holder.
    • Flip over the second layer PCB. Remove the battery from its holder.

  6. Unscrew the two screws holding the light assembly together. Once the screws are undone, the parts of the assembly can be pulled out. Unscrew the two screws holding the light assembly together. Once the screws are undone, the parts of the assembly can be pulled out. Unscrew the two screws holding the light assembly together. Once the screws are undone, the parts of the assembly can be pulled out.
    • Unscrew the two screws holding the light assembly together. Once the screws are undone, the parts of the assembly can be pulled out.

  7. Unscrew the two screws holding down the USB module. Unscrew the two screws holding down the USB module.
    • Unscrew the two screws holding down the USB module.

Joshua Wong

Miembro Desde 28/11/18

255 Reputación

1 Guía escrita

Thanks this was so helpful because every time I do this I break it like literally break the plastic

nodachi Galaxy poison - Contestar

Do you know where I can get broken PS4 controllers?

Chane Akwau Jones - Contestar

it doesn’t come out like that. upon opening the chassis, everything is stuck to the top part of the controller, not the bottom part.

Dennis Hasford - Contestar

First time fixing sticking buttons my triangle button and ps button stick hopefully this works and am able to put back together

Tkuball - Contestar

This video on how to open a ps4 controller should help you too : https://youtu.be/9Chgw4sRTzs

Repair & Resell - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 36

Ultimos 7 días: 235

Ultimos 30 días: 1,217

Todo El Tiempo: 35,482