Saltar al contenido principal

Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

Qué necesitas

  1. Dell Quietkey SK-8000 Keyboard Teardown, Remove Back Plastic Body: paso 1, imagen 1 de 2 Dell Quietkey SK-8000 Keyboard Teardown, Remove Back Plastic Body: paso 1, imagen 2 de 2
    • Flip the keyboard over to expose 8 screws.

    • Use a Phillips screwdriver to unscrew and remove each screw.

  2. Dell Quietkey SK-8000 Keyboard Teardown: paso 2, imagen 1 de 2 Dell Quietkey SK-8000 Keyboard Teardown: paso 2, imagen 2 de 2
    • Lift the keyboard upward from the bottom.

    • Do not pull too hard when lifting the base. Be careful not to destroy the wires connecting to the base of the keyboard.

    • Use a Phillips screwdriver to remove the remaining ten screws on the aluminum plate.

  3. Dell Quietkey SK-8000 Keyboard Teardown, Completion: paso 3, imagen 1 de 3 Dell Quietkey SK-8000 Keyboard Teardown, Completion: paso 3, imagen 2 de 3 Dell Quietkey SK-8000 Keyboard Teardown, Completion: paso 3, imagen 3 de 3
    • Carefully lift each part out. Each part should lift out very easily after the screws are removed.

  4. Dell Quietkey SK-8000 Keyboard Teardown, Siltek Chip Reveal: paso 4, imagen 1 de 1
    • The keyboard controller is seen to be a Siltek R4462.

Ion

Miembro Desde 09/29/15

479 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 10-5, Green Fall 2015 Miembro de Cal Poly, Team 10-5, Green Fall 2015

CPSU-GREEN-F15S10G5

3 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 14

Todo El Tiempo: 987