Saltar al contenido principal

Herramientas Destacadas en este Teardown

Introducción

Use this guide to replace a cracked or malfunctioning display on your older generation Dell QuietKey Keyboard (identified with model number AT101).

If your Dell QuietKey Keyboard (model AT101) isn’t typing like it used to—sticky keys, crunch noises when you type—or is just really dirty, use this guide to tear down the keyboard by removing all of the keys.

Before beginning, make sure to disconnect from any external power source and computer.

Este desmontaje no es una guía de reparación. Para reparar tu Dell QuietKey Keyboard, utiliza nuestros manuales de servicio .

  1. Turn the keyboard over onto its back and remove the eight Phillips #2 screws. Turn the keyboard over onto its back and remove the eight Phillips #2 screws.
    • Turn the keyboard over onto its back and remove the eight Phillips #2 screws.

  2. Remove the 12 Phillips #2 screws. Lift and remove the metal plate to reveal the internal components of the keyboard.
    • Remove the 12 Phillips #2 screws.

    • Lift and remove the metal plate to reveal the internal components of the keyboard.

  3. Remove the cable attached to the controller.
    • Remove the cable attached to the controller.

  4. The keyboard is now fully broken down.
    • The keyboard is now fully broken down.

Aaron Lee

Miembro Desde 07/04/11

187 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 9-71, Walters Spring 2011 Miembro de Cal Poly, Team 9-71, Walters Spring 2011

CPSU-WALTERS-S11S9G71

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 13

Todo El Tiempo: 3,829