Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Datto MP60, utiliza nuestros manuales de servicio .

  1. Datto MP60 Teardown, The box: paso 1, imagen 1 de 1
    • MP60 Packaging

  2. Datto MP60 Teardown, Inside the box: paso 2, imagen 1 de 3 Datto MP60 Teardown, Inside the box: paso 2, imagen 2 de 3 Datto MP60 Teardown, Inside the box: paso 2, imagen 3 de 3
    • MP60

    • 6ft Heavy Gauge Line Cable

    • 6ft Ethernet Cable

    • Wall mounting screws

  3. Datto MP60 Teardown, Remove the screws: paso 3, imagen 1 de 1
    • 8x 3mm Triangle bit case screws

    • 9x Philips #1 Screws

    • User resettable 16a breaker

    • 10/100 Ethernet

  4. Datto MP60 Teardown: paso 4, imagen 1 de 1
    • Assembly lifts out as a single piece after removing screws

    • The wifi board and antennas are located as far away as possible from the power supply to avoid interference.

  5. Datto MP60 Teardown, Wifi Board: paso 5, imagen 1 de 2 Datto MP60 Teardown, Wifi Board: paso 5, imagen 2 de 2
    • Qualcomm - QCA9531

    • 560 Mhz CPU (Not too shabby for some outlets)

    • 2x2 B/G/N 2.4 Ghz Wifi

    • Antenna

    • Reset Switch

    • Heatsink

  6. Datto MP60 Teardown, Outlet Control Board: paso 6, imagen 1 de 1
    • STM8S00 - 16Mhz microcontroller

    • Outlet Status LEDs

  7. Datto MP60 Teardown, Outlet Board: paso 7, imagen 1 de 2 Datto MP60 Teardown, Outlet Board: paso 7, imagen 2 de 2
    • 10A Relay

    • Renergy RN7302 3-Phase power metering IC

  8. Datto MP60 Teardown: paso 8, imagen 1 de 1
    • Surge suppression circuitry

    • High quality 120VAC to 5V DC converter

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 14

Todo El Tiempo: 1,481