Repara tus cosas Comunidad Tienda

Brother PT-90 Personal Labeler Disassembly

Introducción

This is an easy-to-teardown device and shows you the inner workings of the label maker. The main components are batteries and the label cartridge for the tape, and a few screws to further tear down the device.

Qué necesitas

  1. Brother PT-90 Personal Labeler Disassembly, Brother PT-90 Personal Labeler Disassembly: paso 1, imagen 1 de 2 Brother PT-90 Personal Labeler Disassembly, Brother PT-90 Personal Labeler Disassembly: paso 1, imagen 2 de 2

    • Start with your device off. The screen should be blank and not displaying anything.

    • Turn the device over so it's resting face down.

    • You should be able to see the model name of the label-maker, as well as a window in which you can view the label cartridge.

    Traducir

  2. Brother PT-90 Personal Labeler Disassembly: paso 2, imagen 1 de 3 Brother PT-90 Personal Labeler Disassembly: paso 2, imagen 2 de 3 Brother PT-90 Personal Labeler Disassembly: paso 2, imagen 3 de 3

    • Using your thumb, press in and then upward on the fastener at the top of the device. The back of the device should come off easily.

    • Remove the 4 batteries located on the left side of the device.

    Traducir

  4. Brother PT-90 Personal Labeler Disassembly: paso 3, imagen 1 de 3 Brother PT-90 Personal Labeler Disassembly: paso 3, imagen 2 de 3 Brother PT-90 Personal Labeler Disassembly: paso 3, imagen 3 de 3

    • To remove the label cartridge from the device, use a plastic opening tool from your iFixit tool kit.

    Traducir

  5. Brother PT-90 Personal Labeler Disassembly: paso 4, imagen 1 de 3 Brother PT-90 Personal Labeler Disassembly: paso 4, imagen 2 de 3 Brother PT-90 Personal Labeler Disassembly: paso 4, imagen 3 de 3

    • Attach the J1 Screwdriver Bit to the extension tool from your tool kit.

    • Remove all of the screws from the back of the device.

    Traducir

  6. Brother PT-90 Personal Labeler Disassembly: paso 5, imagen 1 de 2 Brother PT-90 Personal Labeler Disassembly: paso 5, imagen 2 de 2

    • Once the screws have been removed, press as shown on the fastener.

    • Carefully open the device.

    Traducir
Linea de Meta

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Tessa Hathaway

Miembro Desde 10/13/16

148 Reputación

1 Guía escrita

Insignias: 10

+ 7 más insignias

Equipo

University of Maine, Team 2-1, Diaz Fall 2016 Miembro de University of Maine, Team 2-1, Diaz Fall 2016

UMAINE-DIAZ-F16S2G1

3 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 25

Todo El Tiempo: 793