Saltar al contenido principal

Qué necesitas

Resumen del Video

Este desmontaje no es una guía de reparación. Para reparar tu Apple Watch Series 4, utiliza nuestros manuales de servicio .

  1. Desmontaje del Apple Watch Series 4, Desmontaje del Apple Watch Series 4: paso 1, imagen 1 de 1
    • Perfil de paciente de Apple Watch:

    • Pantalla LTPO OLED Retina con Force Touch

    • La Serie 4 nuevamente viene en dos tamaños: 40 mm (324 × 394 píxeles) y 44 mm (368 × 448 píxeles).

    • Diseño personalizado de 64 bits de doble núcleo S4 (sistema en paquete)

    • LTE y UMTS opcionales, GPS / GLONASS / Galileo / QZSS, NFC, Wi-Fi 802.11b / g / n 2.4 GHz integrados y Bluetooth 5.0

    • Acelerómetro y giroscopio mejorados, sensores cardíacos ópticos y eléctricos, micrófono, altavoz, altímetro barométrico y sensor de luz ambiental

    • Clasificación de resistencia al agua (hasta 50 metros)

    • WatchOS 5

  2. Desmontaje del Apple Watch Series 4: paso 2, imagen 1 de 3 Desmontaje del Apple Watch Series 4: paso 2, imagen 2 de 3 Desmontaje del Apple Watch Series 4: paso 2, imagen 3 de 3
    • Si bien estos cuadrados negros pueden parecer similares, los rayos X de nuestros expertos en Creative Electron revelan interiores radicalmente diferentes.

    • Nuestro sujeto (izquierda) ya presenta algunas diferencias con la Serie 3 (derecha) - la parte trasera tiene un sensor óptico totalmente nuevo en el medio, rodeado por un nuevo electrodo.

    • Esperamos ver más de cerca ese hardware de ECG.

    • Otras diferencias inmediatas con respecto a la versión "vieja" de 42 mm: las esquinas son notablemente mas redondas para obtener más de ese aspecto de cuadricírculo y el botón lateral ahora se encuentra alineado con la caja.

    • Visto desde un lado, la Serie 4 es notablemente más delgada que la Serie 3 (por 0.7 mm), pero en realidad es más gruesa que la original.

    • Por lo que se ve, una buena parte de ese adelgazamiento es gracias a la nueva pantalla.

    hi I would like to know which is the wifi antenna. Grazie.

    costa.asroma - Contestar

  3. Desmontaje del Apple Watch Series 4: paso 3, imagen 1 de 3 Desmontaje del Apple Watch Series 4: paso 3, imagen 2 de 3 Desmontaje del Apple Watch Series 4: paso 3, imagen 3 de 3
    • Una revisión rápida de los detalles de la espalda de cerámica y zafiro:

    •  Watch, comprobada.

    • Serie 4, comprobada.

    • Una lista de características, incluida la resistencia al agua hasta 50 metros.

    • Sensor óptico, justo en el medio esta vez.

    • Gran sensor eléctrico en forma de anillo, eso es nuevo.

    • Dentro de una de las ranuras de la correa de muñeca, encontramos un nuevo número de modelo, A2008, y en el otro, el número de serie, más un pequeño orificio de ventilación para la compensación de presión.

    Outstanding job on these (as well all the others) photos! Thank you

    Nikon1 - Contestar

    I wonder how they print that serial # in there.

    ktappe - Contestar

    Hello friend that serial is printed by a robot with a special bit, Apple can also customize those engravings in the idevices if users prefer it, thanks for commenting...

    Miguel -

    I think the marking and texts are laser engraved.

    Carver Tang - Contestar

  4. Desmontaje del Apple Watch Series 4: paso 4, imagen 1 de 3 Desmontaje del Apple Watch Series 4: paso 4, imagen 2 de 3 Desmontaje del Apple Watch Series 4: paso 4, imagen 3 de 3
    • Al balancear nuestro péndulo iOpener hacia adelante y hacia atrás, tu cabeza se vuelve más y más pesada. Tus pulseras se hunden en los cojines ... Hola Siri, enciende DND.

    • Ahora podemos colocar nuestra cuchilla debajo del borde de esta brillante pantalla sin asustar a nuestro paciente.

    • Este método aprobado ha sido testado y probado en varias ocasiones, aunque todavía tenemos que determinar cuánta resistencia al agua se restaurará después.

    • Con su trinidad familiar de cables desenchufados de forma segura, podemos echar un vistazo más de cerca a la pantalla.

    They used the iOpener to heat up the screen first and placed it directly on the device for those who did not pick up on it.

    Timothy McEvoy - Contestar

    Can someone enlighten me on the purpose of that tape holding the ribbon cables? It seems to have a copper sheeting and is also connected to the body of the watch….is it some kind of heat sink or thermal protection for the battery below it?

    Asio Otus - Contestar

    Hi ,i would also like to know what the purpose of this tape is ,accidentaly ripped one end of it ,the one closer to 3D force touch connector and after this my Watch is stuck at Apple logo ,anyone ?

    Mario W -

    Hi, I have the same issue also is not possible find the complete flex connector with these two ribbons included

    Eugenio Collado - Contestar

  5. Desmontaje del Apple Watch Series 4: paso 5, imagen 1 de 2 Desmontaje del Apple Watch Series 4: paso 5, imagen 2 de 2
    • Con la pantalla aislada, obtenemos una mejor visión de los contornos de la pantalla nueva. Los píxeles adicionales y la mayor relación pantalla-cuerpo vienen gracias a las esquinas redondeadas, al estilo de los iPhone X, XS y XS Max.

    • La pantalla del modelo de 44 mm ahora cubre 977 mm2, en comparación con 740 mm2 en la Serie 3 de 42 mm.

    • Mientras tanto, el modelo de 40 mm abarca 759 mm2, frente a 563 mm2 en su predecesor de 38 mm.

    • En la parte posterior vemos tres paquetes de chips, de los cuales dos están sellados, mientras que el tercero no tiene marcas detrás de su escudo de metal.

    • Si el historial es una guía, aquí es donde el controlador táctil y los chips NFC están ocultos. Actualizaremos si podemos obtener una identificación positiva.

    So the nfc chip can be removed to a new screen to enable Apple Pay?

    sohbengkuan - Contestar

  6. Desmontaje del Apple Watch Series 4: paso 6, imagen 1 de 2 Desmontaje del Apple Watch Series 4: paso 6, imagen 2 de 2
    • En nuestro camino hacia la batería, nos encontramos con el tri-punto ahora estándar. Lo siento pentalobe, Apple parece tener un nuevo favorito en estos días.

    • Desconectar lo que creemos que es la batería conduce a un momento de confusión ya que nos damos cuenta de que la batería aún está amarrada por su cable flexible. Entonces, ¿qué es lo que acabamos de desconectar?

    • Probablemente no fue importante ... ¿verdad?

    • El cable flexible de la batería real se ha redirigido desde su ubicación en la Serie 3, y ahora yace intercalado debajo de la batería y encima de la placa principal. Con eso despachado, ¡saltémoslo!

    Is the Taptic Engine still being used instead of rumble pack.

    https://appleitunesguide.com/how-does-ap...

    Appleitunesguide - Contestar

  7. Desmontaje del Apple Watch Series 4: paso 7, imagen 1 de 2 Desmontaje del Apple Watch Series 4: paso 7, imagen 2 de 2
    • Aquí está la batería integrada que alimenta el reloj: ¡aquí no hay acción de cuerda automática!

    • Un paquete de potencia recién pulido de 1.113 Wh (291.8 mAh a 3.81 V), etiquetado A2059.

    • ... O podría ser 1.12 Wh, dependiendo de qué lado tú crees está la batería

    • En cualquier caso, eso es un descenso de aproximadamente el 17% de la capacidad de los 1.34 Wh de la Serie 3 de 42 mm (aunque aún más que la batería de 1.07 Wh del modelo de 38 mm de nuestro desmontaje más reciente).

    • Ahora, ¿quién quiere hacer las matemáticas en el volumen? 0.7 mm más delgado pero 2 mm más alto sería...

    • ... ¡lo suficiente como para dar a la batería sus 18 horas diarias de funcionamiento, aparentemente!

    Hello.Small correction to the battery.

    1.07 Wh is in the watch 38mm series 3.

    The watch 42 mm is 1.34 Wh

    Series 4 44 mm has 1.113 Wh is less about 20%

    Dariusz - Contestar

    Hi Dariusz, you’re right. It is indeed 20% less than the 42 mm Series 3. Our Series 3 Teardown was a 38 mm Version. I will edit the step to avoid confusion.

    Tobias Isakeit -

    So battery capacity is the same for both 40mm and 44mm?

    vman699 - Contestar

    The 44mm lasts a little longer

    Miguel -

    Same question as vman699. Do the 40 and 44mm sizes both have the same capacity battery?

    louhobby - Contestar

    Official numbers from Apple:

    40mm: 0.86 Wh

    44mm: 1.12 Wh

    38mm: 1.07 Wh

    42mm: 1.34 Wh

    https://www.apple.com/legal/more-resourc...

    nozukanatake - Contestar

    What about battery capacity of GPS vs LTE?

    anonymous 9856 - Contestar

    Can I have the exact dimension of the battery: LxWxT? Thank you!

    Mr Jiang - Contestar

  8. Desmontaje del Apple Watch Series 4: paso 8, imagen 1 de 2 Desmontaje del Apple Watch Series 4: paso 8, imagen 2 de 2
    • Después del juego de escondidas del conector de la batería, estamos más preparados para un cambio de junta Force Touch.

    • Su conector flexible ahora se encuentra en la esquina completamente opuesta, con dos cables que se apilan en lugar de extenderse uno al lado del otro. Muy simplificado.

    • Ese Motor Táptico, por el contrario, tiene el mismo aspecto que el que recordamos, aunque un poco aplastado. Echemos un vistazo más de cerca.

    Hi, what are the twin cables mentionned ? I unfortunately screwed one connecter from the bottom left of the watch (top corner right on the picture step 8, is it replaceable?

    Antoine D. - Contestar

    Hey Antoine. You have to look for an Apple Watch (44 mm Series 4/5) Force Touch Sensor Gasket. here in the shop

    Steve Strebel - Contestar

  9. Desmontaje del Apple Watch Series 4: paso 9, imagen 1 de 3 Desmontaje del Apple Watch Series 4: paso 9, imagen 2 de 3 Desmontaje del Apple Watch Series 4: paso 9, imagen 3 de 3
    • Aquí tenemos el componente responsable de sacudir las cosas: el Motor Táptico también conocido como un actuador lineal oscilante electromagnético.

    • Comparado con los agitadores de antaño, este es un diseño mucho más delgado, pero también es más largo.

    • Incluso este motor más pequeño ocupa mucho espacio en esta pequeña habitación de dispositivo que podría haber ido a una batería más grande, pero Apple parece sentir que la retroalimentación física es muy importante.

    • ¿Creadores de dispositivos Android? No tanto.

  10. Desmontaje del Apple Watch Series 4: paso 10, imagen 1 de 2 Desmontaje del Apple Watch Series 4: paso 10, imagen 2 de 2
    • A continuación, eliminamos quirúrgicamente el nuevo generador de ruido: se dice que es un 50% más ruidoso, y tal vez más duro, mejor y más rápido.

    • Ahora que el micrófono ha migrado cerca de la corona digital, el altavoz puede aprovechar ese espacio para obtener más volumen.

    • Una junta de silicona sella el altavoz para hacer posible su magia de expulsión de agua, al igual que lo hizo en la versión del año pasado.

    • El pequeño "ojo" negro que se encuentra junto al altavoz puede ser un sensor barométrico, que usa inteligentemente el acceso de la parrilla del altavoz a la atmósfera exterior. Como ya no necesita su propio agujero desagradable en el chasis como lo hizo en la Serie 3, esta es una victoria para Jony Ives en todas partes.

    • Actualización: Resulta que hay un pequeño túnel desde el conducto de ventilación que vimos en el paso 3, pasando por el chasis y justo en el camino de este pequeño sensor. Así que probablemente no necesite ayuda de la rejilla del altavoz, pero aún así creemos que lo más probable es que sea un barómetro.

  11. Desmontaje del Apple Watch Series 4: paso 11, imagen 1 de 3 Desmontaje del Apple Watch Series 4: paso 11, imagen 2 de 3 Desmontaje del Apple Watch Series 4: paso 11, imagen 3 de 3
    • Finalmente, llegamos al núcleo de todas las cosas: el sistema en paquete S4 diseñado por Apple.

    • ¡Buenas noticias para todos! El S4 está asegurado solo con tornillos, y sale de inmediato, un cambio bienvenido de los SiP ferozmente pegados de los últimos años.

    • Como siempre, el paquete está envuelto en un bloque sólido de resina, lo que significa que la mayoría de sus secretos serán difíciles de extraer. Afortunadamente, los componentes de RF permanecen un poco más expuestos:

    • Avago AFEM-8087 (probable módulo front-end)

    • OU JQ

    • YY MEH ECE (esto parece una parte de Bosch, probablemente el nuevo acelerador + giroscopio)

    • AE827 I2033 0836

    • ST Microelectronics ST33G1M2 MCU de 32 bits con ARM SecurCore SC300: el mismo eSIM que encontramos en el último Apple Watch y en el iPhone XS y el iPhone XS Max.

    Hey whats the function of the copper sticker und whats the right name of it?

    Philipp Mielke - Contestar

    iv been trying to find the answer to this question as well! this is my own wild guess but it could serve as either a heat sink (seeing as it connects to the body of the watch? or maybe some kind of heat protector for the battery thats just underneath or perhaps it serves as some kind of grounding property…. but yeah I too would love to have a definitive answer…

    Asio Otus -

    We’re also not absolutely sure, but support Asio’s guess on a combination of a heat sink and grounding element. It may even shield the logic board from external interference.

    Tobias Isakeit -

    Quelle est la fonction de l'autocollant en cuivre et quel est le bon nom?

    krikiba6801 - Contestar

    hi I would like to know which is the wifi antenna. Grazie.

    costa.asroma - Contestar

    Do you have assembly parts for that?

    Annie Camara - Contestar

    Are the S4 SiPs all the same between different sizes? ( 40mm vs 44mm , nike+ vs no nike)

    Daniel Tircob - Contestar

  12. Desmontaje del Apple Watch Series 4: paso 12, imagen 1 de 3 Desmontaje del Apple Watch Series 4: paso 12, imagen 2 de 3 Desmontaje del Apple Watch Series 4: paso 12, imagen 3 de 3
    • En nuestro esfuerzo por expulsar el conjunto de sensores del corazón, aparece todo el fondo. Resulta que no estaban bromeando acerca de más acceso a través del caso inferior.

    • Vemos un imán en el medio para mantener el reloj en el cargador, la bobina de carga y un nuevo silicio:

    • A88 AY10

    • 18206 00D5

    • Es una matriz muy ordenada de almohadillas negras debajo del paquete S4, posiblemente para la disipación de calor. O tal vez son solo almohadas cómodas para mantener bajos sus niveles de estrés.

    Does it look like the foam is conductive?

    It also appears the bottom is just press-fitted with the O ring offering the water & dust sealing and wedge so the back doesn’t come off. For sure a better design than the glued backs in the older series. The trick will be getting the back on without damaging the O ring, a touch of scuba divers O ring grease will be needed.

    Dan - Contestar

    Is the back a solid piece, or is the circular part in the center glued onto the back too as it was in the series 3?

    Mac 128 - Contestar

    Any idea what kind of chips the A88 AY10 and 18206 00D5 are and who provides them?

    Alexandros Roussos - Contestar

  13. Desmontaje del Apple Watch Series 4: paso 13, imagen 1 de 3 Desmontaje del Apple Watch Series 4: paso 13, imagen 2 de 3 Desmontaje del Apple Watch Series 4: paso 13, imagen 3 de 3
    • Este donut dorado es probablemente una antena aerodinámica, ya que no hemos visto los soportes complejos o las juntas doradas de antaño.

    • Mientras tanto, hemos llegado a la característica principal: nuevos sensores eléctricos del corazón (ECG) para complementar los sensores ópticos existentes.

    • El Apple Watch es un ECG de Derivación I , lo que significa que solo mide el voltaje entre los brazos derecho e izquierdo. El primer electrodo está en el reloj, presionado contra su muñeca. El segundo es la corona, sostenida por los dedos de la mano opuesta.

    • Estos electrodos detectan pequeños cambios en la polarización eléctrica a través de su piel a medida que tu corazón late. El S4 luego interpreta esa información para calcular y analizar tu ritmo cardíaco.

    So the antenna is at very bottom? With no shielding whatsoever giving your body a nice radiation boost?

    idmitriy - Contestar

  14. Desmontaje del Apple Watch Series 4: paso 14, imagen 1 de 3 Desmontaje del Apple Watch Series 4: paso 14, imagen 2 de 3 Desmontaje del Apple Watch Series 4: paso 14, imagen 3 de 3
    • Es hora de excavar en ese segundo electrodo: la corona digital completamente nueva. Sacamos algunas piezas y rápidamente encontramos las partes divertidas.

    • Toma tu lupa, estamos entrando en micro-mundo.

    • El cilindro dorado interno tiene micro arañazos, lo que permite que un codificador óptico (la pequeña caja negra en el cable plana) rastree su rotación.

    • El soporte elástico detrás del cilindro probablemente conduzca la señal eléctrica desde su dedo hasta el reloj, completando el circuito de ECG.

    • El pequeño interruptor detrás de ese resorte actúa como el botón mecánico de la corona. Además, hay una buena junta en el eje de la corona exterior que actúa como protección contra el ingreso de agua o polvo.

    Would love to get more details on the ECG hardware. Did Apple use a piezo sensor or did they use a unique design?

    Wes - Contestar

    How did you remove the digital crown?

    Kev - Contestar

    How does the crown attached to the body?

    Albert - Contestar

    is there a weak bluetooth signal antenna,

    yusuf yusuf - Contestar

  15. Desmontaje del Apple Watch Series 4: paso 15, imagen 1 de 1
    • El Apple Watch original fue revolucionario en su lanzamiento, pero las actualizaciones anuales han sido en su mayoría menores, hasta ahora.

    • Si bien el primero relojo estaba extrañamente unido y usaba demasiado pegamento, el Serie 4 se siente mucho más cuidadosamente diseñado.

    • El experto de Apple, John Gruber, ha comparado esto con el salto en el diseño que trajo el iPhone 4, e incluso podríamos ir un poco más allá y llamarlo un iPhone 5: un dispositivo que conoce sus prioridades, y quiere lucir tan elegante por dentro como por fuera.

    • Si este reloj no subió tu ritmo cardíaco, tal vez es hora de un doble desmontaje del iPhone.

    • ¡Muchas gracias a Creative Electron por ayudarnos! Ahora solo queda una cosa. Redoble de tambores por favor ...

  16. Consideraciones Finales
    • Los reemplazos de banda de reloj siguen siendo rápidos y simples, e incluso son compatibles con modelos anteriores.
    • Los reemplazos de pantalla son difíciles pero no imposibles: es lo primero que se suelta y se separa mediante simples conectores ZIF.
    • Los reemplazos de batería son bastante sencillos, una vez que estás adentro.
    • Aunque no son propietarios, los tornillos de tres puntos increíblemente pequeños son un impedimento para la reparación. Y están por todos lados.
    • Varios cables flexibles de componentes se montan directamente en el paquete S4, lo que requiere microsoldado hábil para el reemplazo.
    • El sistema S4 revestido de resina hace que la mayoría de las reparaciones a nivel de la placa sean imposibles.
    Calificación de Reparabilidad
    6
    Reparabilidad 6 de 10
    (10 es lo más fácil de reparar)

Un agradecimiento especial a estos traductores:

en es

94%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Tobias Isakeit

Miembro Desde 03/31/14

116,767 Reputación

188 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

322 Miembros

2,506 Guías creadas

52 comentarios

So how much of the inside is actually accessible and serviceable from the back of the device?

That looks a lot less hard to remove and put back without losing waterproofing (looks like it even has a silicone gasket…)

maarten - Contestar

Besides the sensors attached to the bottom cover, it doesn’t look like you can get to the battery and other components from that side. The S4 blocks everything and it’s much too large to remove from the bottom out. Much of the screw heads are also facing away from the bottom side.

bert -

It is not possible to access the internals from the back, the back is locked to the case with screws from the inside.

Tom Chai -

%#*@ impressed with the new design

Yolo - Contestar

Looks to me like the black pads would act as a shock absorber of sorts for the SiP to move against in a bang, sorta like jewel shock absorbers in mechanical watches.

tipoo - Contestar

Any indication of how much ram the new GPS and cell modem models have?

ijuggle5 - Contestar

wait, are you not opening up the SiP?

Suchir Kavi - Contestar

It is resin encased, not very easy to do.

Dillan -

About the sensor from Bosch, it should be Bosch Sensortek if it is right. Sensortek is the company for consumer electronics, Bosch it self only sells sensors for automotive.

Zu deutsch:

Bei dem Sensor handelt es sich vermutlich tatsächlich um ein Produkt von Bosch. Allerdings verkauft Bosch selbst nur an Automotive Kunden und die Sensoren für Consumer kommen von der Tochtergesellschaft Bosch Sensortek. Einfach der vollständigkeit halber.

Ich habe für Bosch im Halbleiterwerk in Reutlingen gearbeitet und auch solche Chips im Bereich Lithographie bewegt.

TheLOD2010 - Contestar

Is the diagnostic port 6 pins or 5 pins?

Jake - Contestar

appears to be 6; the contacts are visible in the last picture below the speaker on the top left.

Logan Teffertiller -

really cool teardown! if i can complain, maybe use a microfiber towel to remove fingerprints before taking the glorious money-shots. unless those were included for a sense of scale…?

ricq - Contestar

Please disassemble the optical sensor which seems to be new, 6 LEDs and 8 photodiodes, please check for wavelength of LEDs (e.g. power them and check out the colors).

Thanks!

Franz Hohler - Contestar

Yes, please do that! It’s very important to figure out how much better the sensor is. Thank you!

ps: I think it’s 4 LEDs

Annie B -

So just to confirm, the battery size is DOWN from 1.34 watt-hour of last year’s 42 mm watch to 1.12 watt-hour of this years 44 mm watch, is that the case here?

I’m not sure if the efficiency improvement in the S4 SiP compared to S3 of last year’s model would make up for that 20% battery loss and the 30% larger screen size. I would imagine the actual stand-by time would decrease by a fair margin compared to last year’s model (44 mm vs 42 mm).

saturnv - Contestar

I must say I don’t mind the tri-point screws. At these sizes, phillips screws are a real pain - like they aren’t at any size, think on - dropping to just three wings gives the screw a bit more meat.

But then again, I have a similar argument for pentalobe - that screw size is too small for torx or hex, Phillips is bad and wrong - pentalobe makes a nice, solid joint between screw and driver.

Robert Backhaus - Contestar

it should be noted that display replacements are not doable since apple changed something in watchOS 4.3.1 which pairs the display to the watch. Watches with swapped displays won’t pair to phones and also wont update…

darker - Contestar

IFixit staff sure has a strange concept of that overall ‘repairability’ score. Based on the information I’ve seen, and the fact that you’ve permanently compromised the water proofing by opening the device and not replacing the adhesive pack with a new one that Apple won’t provide, I don’t see how this gets anything higher than a “3”. Looking at the pictures, there was also some pretty rippin’ adhesive in there, looking at the distortion on the battery envelope. 4 years ago, you would have crapped all over this thing.

SonarTech - Contestar

It seems iFixit ALWAYS give better score to Apple stuff, even if they don’t open things (like on other manufacturer’s items) that tend to give *bad* score… is iFixt a *real* iThing like Apple funded? thus doing this?

jorgehpm - Contestar

So the antenna is at very bottom? Giving your body a nice and radiation boost?

idmitriy - Contestar

If you’re worried about the microscopic amount of radiation this thing puts out, then don’t eat any bananas; the potassium in them has more radiation.

ktappe -

Hi. Anybody know, is the Watch s4 case and screen of GPS version and LTE interchargeble or not? Thanks.

GeorgeF - Contestar

Anybody knows what is the Sensor used to measure the rotation of the crown?

Cesar - Contestar

It’s an optical rotary encoder—basically this sensor watches microscopic scratches on this cylinder and counts passing scratches as the crown turns to figure out when and how much it’s turning.

Adam O'Camb -

hi, so what was the gps (GNSS) chip used please?

triathlon.duathlon.5k - Contestar

The ECG sensing facility is an amazing addition to a consumer device. It isn’t obvious from usage or the tear-down when ECG pick-up is resistive i.e. the crown and rear pads are resistively coupled to an input, or whether it is capacitive i.e. the crown/rear pad is a dielectric with the finger acting as a capacitor plate. It is probably resistive, but anyone know for sure? The rear pads appear to be a pair, I wonder why?

aliveecg - Contestar

is it more durable than the 3 in terms of water resistance? i’m hard on my watch from a sweat and swim perspective. I always have a popped screen. the 3 actually cracked from the inside all the way around the screen. will the 4 do better with battery swelling (which i suspect this is but haven’t dismantled it until i’m positive its out of warranty) and general water exposure?

Jennifer Lea - Contestar

To change the battery stays marks... I will not buy!

joseferreira_ms - Contestar

Is there any chance replacing the display against a new one without loosing the NFC functionality for apple pay? Is there a way to register the new nfc part of the display to the watch for getting back NFC? Does Apple help customers with this issue after installing a new display?

Matt Branagh - Contestar

To reduce the likelihood of problems (no guaranty), delete all your ApplePay account info before the replacement, and then re-enter it with the new display installed (test functionality before closing the watch with new adhesive). But there is also a user guide to replace the NFC chip on a new display with the one from the old damaged display (Series 3 NFC on Series 2 display).

Tobias Isakeit -

What is the black tape with two screw connectors that’s taped on the flex cable?

Sergio Cortez - Contestar

You mean in the final picture the second part from the top on the left? That’s the service port flex cable (with six golden contacts) that hides behind the display flex cables.

Tobias Isakeit -

Anntena wifi, and Bluetooth. Where ?

yusuf yusuf - Contestar

On Step 11, there are 5 ribbon cables shown in the picture. What are the two side ones for (the ones that attach down with screws)? What would happen if one of those ripped?

Pavlin Vassilev - Contestar

Hello Pavlin, those might be a combination of grounding and heat distribution. Probably not a big thing if one rips, but if both are damaged your could get warmer than usual.

Tobias Isakeit -

Hi .

Is it possible to swipe between the scrollbar and the main body of the clock, Something happens to the scroll????

mozhgan abbasi - Contestar

I poked the little hole next to the button with a sim car ejector…(idiot)

would I have damaged anything I’m worried about it’s waterproofing if there is any there?

Tom Turner - Contestar

Hi Tom, behind the hole there is the microphone. If you can still “talk” to Siri and she understands you, your mic is in good condition (let that be your first test). If not you might have damaged the mic. Depending on how hard you pushed there is a slight possibility that you’ve pushed the mic inwards a bit. If that’s the case I would not take the watch for a swim (or shower with it).

Tobias Isakeit -

other than acids, any recommendations on epoxy removers to expose the chip-set on the board, post removal?

Chris Maldonado - Contestar

I have broken the glass on the back of the watch that covers the sensors, could this be easy removed and replaced without a total strip down?

Chris Leeks - Contestar

This would come close to a total strip down—display, battery, taptic engine, and the logic board need to come out before being able to take out the bottom part. Assuming you’ll find a replacement part.

Tobias Isakeit -

Hi.

I changed my 40mm Watch 4 stack screen and when I put the new one it stopped giving image.

The watch works because it vibrates and the iPhone recognizes it to match it, but I don't see anything on the screen. I put the old one back on, but nothing appeared on the screen either. The problem is not on the screen, but I don't know what it can be. Can anybody help me?

Thank you.

Pepe - Contestar

The display cables are very delicate and rip easily. also, there are two additional contacts to each side that ground to the frame which are equally fragile (see step 11). But to start with you might want to check the proper seating of the connectors in the ZIF sockets and that the contacts are clean.

Tobias Isakeit -

hi I would like information if possible. in practice after replacing the display the AW does not remain connected if I move away from the iphone about 1mt and the wifi the same thing. I looked but I can't locate the antenna. can you tell me where it is? thanks

costa.asroma - Contestar

The NFC chip is on the back of the display. Did you unpair before the repair? Maybe unpairing with the old display and then pairing again with the new one might help. But that’s just a guess, the Apple Watch is quite tricky when it comes to NFC communication.

Tobias Isakeit -

I’m not sure if you can answer this, but, does it look like the heart sensor array is the same on the 5 as on the 4? I have a 4 with busted sensor and the back of a 5 laying around and am interested in getting a working watch out of it!

Kediil - Contestar

I can’t say for sure (lockdown—don’t have both models at hand right now). But even if those sensors are similar, I doubt it is possible to fit S4 parts into an S5 case. Judging from this step in the S5 teardown compared to step 13 in this guide I’d say: Not compatible.

Tobias Isakeit -

Where is located WiFi & Bluetooth antenna

iphoneunlocknetwork - Contestar

Ok one comment my apple watch series 4 just lost the sticker seal and fell off even disconnected from ribbon cable… everything is working fine but (heart sensor) won’t stay any tips on a new seal or anything similar?

David Colon - Contestar

Esa banda negra fina que une los tres conectores de pantalla y que va atornillada ¿Sirve para algo?, en la mayoria de videos se rompe y no se reemplaza.

Oscar Cervelló - Contestar

If I replace the rear glass which cracked after a fall, will the waterproof or water resistance be gone? I like using my apple watch to track my swim laps.

Carlos Sibal - Contestar

Are all the digital crowns the same even on series 7 or its better at handling dust and sweat?

Avi A - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 11

Ultimos 7 días: 156

Ultimos 30 días: 659

Todo El Tiempo: 273,251