Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Apple Studio Display M2454, utiliza nuestros manuales de servicio .

  1. Apple Studio Display M2454 Teardown, Apple Studio Display M2454 Teardown: paso 1, imagen 1 de 1
    • Notice that the main components of the monitor are only accessible from the back of the device.

  2. Apple Studio Display M2454 Teardown: paso 2, imagen 1 de 1
    • Locate the four hex head screws located on the corners of the back panel.

    • Remove the screws with a 2mm hex screwdriver.

  3. Apple Studio Display M2454 Teardown: paso 3, imagen 1 de 1
    • Remove the clear and gray back panels.

  4. Apple Studio Display M2454 Teardown: paso 4, imagen 1 de 1
    • Remove the three screws with #2 phillips head screwdriver.

  5. Apple Studio Display M2454 Teardown: paso 5, imagen 1 de 1
    • To remove the metal panel, push towards the bottom of the monitor to release its clips and pull the panel away.

  6. Apple Studio Display M2454 Teardown: paso 6, imagen 1 de 1
    • Remove screw holding the plastic bracket with #2 Phillips head screwdriver.

  7. Apple Studio Display M2454 Teardown: paso 7, imagen 1 de 1
    • Remove the four screws on the metal bracket.

  8. Apple Studio Display M2454 Teardown: paso 8, imagen 1 de 1
    • Remove the two philips head hold-down screws with the #2 Phillips head screwdriver.

  9. Apple Studio Display M2454 Teardown: paso 9, imagen 1 de 1
    • Remove black connector by pushing the end of the tab closest to the wiring and pulling away from board.

  10. Apple Studio Display M2454 Teardown: paso 10, imagen 1 de 1
    • Remove white connector by lifting tab and pulling away from board.

    • Be careful when lifting tabs, they break easily.

  11. Apple Studio Display M2454 Teardown: paso 11, imagen 1 de 1
    • Remove connector connected to the hold down previously removed simply by pulling with hand.

  12. Apple Studio Display M2454 Teardown: paso 12, imagen 1 de 1
    • Now that the main computer cable is detached, remove it away from monitor.

  13. Apple Studio Display M2454 Teardown: paso 13, imagen 1 de 1
    • Remove the two screws holding the USB port in place with #2 Phillip's head screwdriver.

  14. Apple Studio Display M2454 Teardown: paso 14, imagen 1 de 1
    • Remove the screw on the wire hold down with #2 Phillips head screwdriver.

  15. Apple Studio Display M2454 Teardown: paso 15, imagen 1 de 1
    • Remove white connector connected to LCD main board by lifting tab with tool and pulling away from board.

  16. Apple Studio Display M2454 Teardown: paso 16, imagen 1 de 1
    • The USB port is now detached, remove it from monitor.

  17. Apple Studio Display M2454 Teardown: paso 17, imagen 1 de 1
    • Remove connector on the left bottom corner of the LCD main board by simply pulling with hand.

  18. Apple Studio Display M2454 Teardown: paso 18, imagen 1 de 1
    • Remove the connector on the bottom right corner by 1st removing tape first and pulling with hand.

  19. Apple Studio Display M2454 Teardown: paso 19, imagen 1 de 1
    • Remove top right connector of the LCD main board by pulling with hand.

  20. Apple Studio Display M2454 Teardown: paso 20, imagen 1 de 1
    • Remove the final connector of the LCD main board by pulling with hand.

  21. Apple Studio Display M2454 Teardown: paso 21, imagen 1 de 1
    • Remove the four screws on each corner of the main board with #2 Phillips head screwdriver.

  22. Apple Studio Display M2454 Teardown: paso 22, imagen 1 de 1
    • The board is now detached, remove it from monitor.

  23. Apple Studio Display M2454 Teardown: paso 23, imagen 1 de 1
    • Locate the top and bottom connector on the CCFL inverter and remove it by inserting pin into the small holes and pulling away.

    • This step may be easier with two people.

  24. Apple Studio Display M2454 Teardown: paso 24, imagen 1 de 1
    • Remove the two screws on the top and bottom of the CCFL inverter with #2 Phillips head screwdriver.

  25. Apple Studio Display M2454 Teardown: paso 25, imagen 1 de 1
    • The CCFL inverter is now detached, remove it from monitor.

  26. Apple Studio Display M2454 Teardown: paso 26, imagen 1 de 1
    • You have now successfully taken apart a Apple Studio Display M2454.

Dylan Perry

Miembro Desde 01/20/10

177 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 13-27, Maness Winter 2010 Miembro de Cal Poly, Team 13-27, Maness Winter 2010

CPSU-MANESS-W10S13G27

4 Miembros

9 Guías creadas

3 comentarios

This model is also known as the Apple Studio Display 15" LCD.

analogcd - Contestar

excellent wee guide......i came here in my search for a replacement stand for this model.

bobby nailen - Contestar

Failing caps were the main problem with this — no air flow.

Mal - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 28

Todo El Tiempo: 7,557