Saltar al contenido principal

Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

  1. Unscrew the battery cap Remove battery The cap is heavily tightened from the factory, therefore it may be necessary to use a rubber mat for added grip.
    • Unscrew the battery cap

    • Remove battery

    • The cap is heavily tightened from the factory, therefore it may be necessary to use a rubber mat for added grip.

    Is it possible to get a replacement battery compartment cap?

    Herb yeung - Contestar

  2. Unscrew the lens holder as shown in the picture
    • Unscrew the lens holder as shown in the picture

  3. Slide the lens housing down, toward the base, to remove Note that once the lens housing is pushed down the lens and reflector pop out. Note that once the lens housing is pushed down the lens and reflector pop out.
    • Slide the lens housing down, toward the base, to remove

    • Note that once the lens housing is pushed down the lens and reflector pop out.

  4. The Anker LC-90 is now tore down
    • The Anker LC-90 is now tore down

Nick Wolfe

Miembro Desde 24/01/18

627 Reputación

2 Guías creadas

Equipo

Cal Poly, Team S18-G4, Livingston Winter 2018 Miembro de Cal Poly, Team S18-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G4

4 Miembros

10 Guías creadas

cannot buy parts or return

JULIA - Contestar

have an l90 by anker

where can i get parts

seems to need new assembly where u plug in usb

JULIA - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 15

Ultimos 30 días: 62

Todo El Tiempo: 595