Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Afterglow Prismatic Wired Controller for Xbox One, utiliza nuestros manuales de servicio .

  1. Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove clear casing: paso 1, imagen 1 de 2 Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove clear casing: paso 1, imagen 2 de 2
    • Use a Phillips #0 Screwdriver to remove the seven Phillips head screws.

    • Separate two halves of clear casing by holding one side and lifting the other.

  2. Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove main circuit board: paso 2, imagen 1 de 3 Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove main circuit board: paso 2, imagen 2 de 3 Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove main circuit board: paso 2, imagen 3 de 3
    • Use a Phillips #0 Screwdriver to remove the seven Phillips head screws.

    • Lift motors off of controller.

    • Lift circuit board off of controller.

  3. Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove secondary circuit board: paso 3, imagen 1 de 3 Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove secondary circuit board: paso 3, imagen 2 de 3 Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove secondary circuit board: paso 3, imagen 3 de 3
    • Use a Phillips #0 Screwdriver to remove the three screws.

    • Remove triggers by lifting them off the circuit board.

    • Lift the circuit board off of the controller.

  4. Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove power and mute buttons: paso 4, imagen 1 de 3 Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove power and mute buttons: paso 4, imagen 2 de 3 Afterglow Prismatic Wired Controller for Xbox One Teardown, Remove power and mute buttons: paso 4, imagen 3 de 3
    • Remove the power and mute button by pulling them out. They will be loose at this point and may fall out by themselves.

Zachary Crandall

Miembro Desde 01/14/14

151 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 17-5, Forte Winter 2014 Miembro de Cal Poly, Team 17-5, Forte Winter 2014

CPSU-FORTE-W14S17G5

5 Miembros

6 Guías creadas

6 comentarios

how u clean it because i accident spill tea inside i cleaned it once it worked for a weak and it started to do it again how can i fix it please help me

Xavier Adams - Contestar

You should use an earbud/”q-tip” dampened with isopropyl alcohol (otherwise known as IPA) to clean all areas affected by the spill.

infiniti25 -

a phillips #0 doesnt seem to fit into the screws.

reagen_lionel - Contestar

How are the poitve and negative leads soldered to the board as I would like to swap wireless internals into controller and keep the lights

glohoodlum - Contestar

I am curious about the pair of programmable wheels on the underside, do they have any markings or part numbers on them that would help in sourcing replacements? I’ve been in touch with PDP and confirmed that my controller is past their warranty period, but it is only the underside wheels that have failed and I’m trying to find replacements.

S.R. Cooper - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 26

Ultimos 30 días: 103

Todo El Tiempo: 26,445