Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Acer Liquid E1, utiliza nuestros manuales de servicio .

  1. Acer Liquid E1 Teardown, Acer Liquid E1 Teardown: paso 1, imagen 1 de 1
    • Remove the plastic back and the exposed battery.

    • Do not forget to remove sim- and SD-cards

    • Use a torx t5 to unscrew all screws. This will be the first and last time you'll use a screwdriver with this device.

  2. Acer Liquid E1 Teardown: paso 2, imagen 1 de 2 Acer Liquid E1 Teardown: paso 2, imagen 2 de 2
    • Use a plastic opening tool or spudger

    • Pry around the side to release the backframe from the middleframe

    • Be careful as the frame is quite fragile

  3. Acer Liquid E1 Teardown: paso 3, imagen 1 de 3 Acer Liquid E1 Teardown: paso 3, imagen 2 de 3 Acer Liquid E1 Teardown: paso 3, imagen 3 de 3
    • To free the main board, remove the connector and antenna-cable

    • Use a plastic spudger

    • Be careful not to chip components

  4. Acer Liquid E1 Teardown: paso 4, imagen 1 de 3 Acer Liquid E1 Teardown: paso 4, imagen 2 de 3 Acer Liquid E1 Teardown: paso 4, imagen 3 de 3
    • Tilting the main board will reveal this connection

    • Use a plastic spudger to open the lock

    • Carefully pull the flex cable out of it

    • Don't put alot of stress on it

  5. Acer Liquid E1 Teardown: paso 5, imagen 1 de 3 Acer Liquid E1 Teardown: paso 5, imagen 2 de 3 Acer Liquid E1 Teardown: paso 5, imagen 3 de 3
    • At the bottom, use a pair of tweezers to remove the yellow tape from the connector

    • Use a plastic spudger to unlock

    • Pull the flexcable out carefully

  6. Acer Liquid E1 Teardown: paso 6, imagen 1 de 2 Acer Liquid E1 Teardown: paso 6, imagen 2 de 2
    • Next, use a platic spudger to remove the flex cable from its connection

  7. Acer Liquid E1 Teardown: paso 7, imagen 1 de 3 Acer Liquid E1 Teardown: paso 7, imagen 2 de 3 Acer Liquid E1 Teardown: paso 7, imagen 3 de 3
    • Use a spudger to remove the bottom-plate from the frame.

    • Be careful when using metal tools (like I did)

    • Make sure the antenna cable isn't attached to anything except it's socket

  8. Acer Liquid E1 Teardown: paso 8, imagen 1 de 3 Acer Liquid E1 Teardown: paso 8, imagen 2 de 3 Acer Liquid E1 Teardown: paso 8, imagen 3 de 3
    • Let the remaining heat at 95°C for about 3-5 minutes to soften the adhesive

    • Use an opening tool to pry at the top, between your digitizer and the middleframe

    • Open it from the top, your digitizer-flex runs at the bottom

    • Be careful when using a heat-gun. Heat-guns don't distribute heat evenly and LCD-burns may occur

  9. Acer Liquid E1 Teardown: paso 9, imagen 1 de 3 Acer Liquid E1 Teardown: paso 9, imagen 2 de 3 Acer Liquid E1 Teardown: paso 9, imagen 3 de 3
    • To remove the LCD, remove the sticker on the back of the midframe. It conseals the LCD-flex

    • Be careful when removing the sticker. It's glued tightly and too much stress will tear the LCD-flex

    • Remove the LCD by pulling the whole cable through the midframe.

  10. Acer Liquid E1 Teardown: paso 10, imagen 1 de 1
    • All done

    • I hope you enjoyed it as much as I did

Maxim

Miembro Desde 04/30/14

2,297 Reputación

3 Guías creadas

Equipo

iFixers Belgium Miembro de iFixers Belgium

Business

1 Miembro

5 Guías creadas

Un comentario

Great Manual.. it work fine! thanks,,

JoeTech - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 16

Todo El Tiempo: 6,748