Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

Herramientas Destacadas en este Teardown

  1. There are three blue LEDs to show you the power in the battery.
    • There are three blue LEDs to show you the power in the battery.

    • There is also a handy LED to see what you are doing in the dark.

    Agregar Comentario

  2. The bottom of the device.
    • The bottom of the device.

    • It's time for some prying. Take out the rubber plugs at the bottom of the device.

    • Remove the screws which are underneath the plugs.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • use a flathead screwdriver or a spudger to pry open the device.

    • Don't pry at the front of the device - there are a few hooks and you do not want to break them.

    Agregar Comentario

    • A first glance at the inside: a big battery and the logic board.

    • There is a 1800 mAh battery in it.

    • There are two screws in the logic board, the battery is glued to the casing.

    Agregar Comentario

    • The other side of the electronics.

    • And the logic board.

    Agregar Comentario

    • And there it is: the A-Solar PowerBank AL-200 torn down.

    • It was easy to do.

    Agregar Comentario

storm

Miembro Desde 07/07/12

497 Reputación

2 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 6

Últimos 30 Días: 30

Todo El Tiempo: 3,307