Saltar al contenido principal

Envío gratis en pedidos nacionales de $75 o más

Qué necesitas

Herramientas

Este desmontaje no es una guía de reparación. Para reparar tu PlayStation, utiliza nuestros manuales de servicio .

    1. (TC) PlayStation Teardown, (TC) PlayStation Teardown: paso 1, imagen 1 de 1
      • Flip the unit upside down to access the six screws on the bottom.

      • Remove the six screws indicated with a Phillips-head screwdriver. All the screws are of the same length.

      Pregunta a FixBot

      Agregar Comentario

    2. (TC) PlayStation Teardown: paso 2, imagen 1 de 1
      • Turn the unit back over, and pull the top half up and away from the device.

      Pregunta a FixBot

      Agregar Comentario

    3. (TC) PlayStation Teardown: paso 3, imagen 1 de 1
      • Unplug the laser assembly's power cable and ribbon cable from the main board.

      • Remove the two screws on the memory card/controller port, disconnect the ribbon cable, and lift it out of the case.

      Pregunta a FixBot

      Agregar Comentario

    4. (TC) PlayStation Teardown: paso 4, imagen 1 de 2 (TC) PlayStation Teardown: paso 4, imagen 2 de 2
      • To remove the power supply, disconnect the cable and remove the two screws, then lift it out of the case.

      Pregunta a FixBot

      Agregar Comentario

    5. (TC) PlayStation Teardown: paso 5, imagen 1 de 2 (TC) PlayStation Teardown: paso 5, imagen 2 de 2
      • Remove the 3 screws from the shield.

      Pregunta a FixBot

      Agregar Comentario

    6. (TC) PlayStation Teardown: paso 6, imagen 1 de 2 (TC) PlayStation Teardown: paso 6, imagen 2 de 2
      • Remove the 5 Phillips screws.

      • You can now lift the main board out of the case.

      Pregunta a FixBot

      Agregar Comentario

    7. (TC) PlayStation Teardown: paso 7, imagen 1 de 2 (TC) PlayStation Teardown: paso 7, imagen 2 de 2
      • Lift the RF shield out of the case.

      Pregunta a FixBot

      Agregar Comentario

    8. (TC) PlayStation Teardown: paso 8, imagen 1 de 2 (TC) PlayStation Teardown: paso 8, imagen 2 de 2
      • Reinstall the RF shield by dropping it in and lining up the slots and tabs.

      Pregunta a FixBot

      Agregar Comentario

    9. (TC) PlayStation Teardown: paso 9, imagen 1 de 2 (TC) PlayStation Teardown: paso 9, imagen 2 de 2
      • Replace the main board. Only install the screws indicated in red.

      Pregunta a FixBot

      Agregar Comentario

    10. (TC) PlayStation Teardown: paso 10, imagen 1 de 1
      • Replace the top shield, and secure with the 3 screws indicated.

      • Reinstall the memory card / controller module. Connect the ribbon cable and replace the 2 screws.

      Pregunta a FixBot

      Agregar Comentario

    11. (TC) PlayStation Teardown: paso 11, imagen 1 de 1
      • Align the optical drive assembly with the three pegs.

      • Reconnect the power and data cables for the optical drive.

      Pregunta a FixBot

      Agregar Comentario

    12. (TC) PlayStation Teardown: paso 12, imagen 1 de 1
      • Slide the cover on the system in the same way you took it off and replace the black screws indicated.

      Pregunta a FixBot

      Agregar Comentario

    13. (TC) PlayStation Teardown: paso 13, imagen 1 de 1
      • Plug in the console and turn it on.

      • Thanks for looking at my teardown!

      Pregunta a FixBot

      Agregar Comentario

Autor

con

Nick

Miembro Desde 11/10/09

106,912 Reputación

73 Guías creadas

0Guía Comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 40

Ultimos 30 días: 195

Todo El Tiempo: 47,355