Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

Preguntas 569 Ver todo

Will not recognize replacement hard drive

I went through the hard drive replacement guide step by step. I did everything according to directions. I did not have any parts left over at the end. My iMac will power on, but will not recognize the new hard drive I installed. I ran the Snow Leopard install CD because I wanted to restore from backup to the new hard drive. The install program ran from the DVD optical drive, but it simply cannot see the new internal hard drive. My original 250GB hard drive was made by Western Digital the new 500GB hard drive is a Hitachi Deskstar model. I have not yet attempted to replace the original and see what happens.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 2
Agregar un comentario

1 Respuesta

Solución Elegida

When you boot from the installation disk, did you go to Utilities - Disk Utility and format the disk?

Fue útil esta respuesta?

Calificación 4

Comentarios:

I went to Utilities - Restore from Time Machine backup (or something of the kind).

por

Ok, I feel less than intelligent. Yes, I had to format the drive first. Thanks for the help.

por

No problem, glad to help.

por

Thank you for this too. I'm glad you had this problem and posted the solution. Didn't know I had to format it before it would see it!

por

Agregar un comentario

Añadir tu respuesta

markbradley estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 12

Todo El Tiempo: 3,166