My screen is dark after digitizer repair

Question

iPad 2 GSM

IPad 2 GSM con 16, 32 o 64 GB de almacenamiento y un procesador Dual Core A5. Número de modelo A1396. La reparación es complicada y requiere calor y palanca.

Preguntas 152 Ver todo

Robin @robin46555

Rep: 25

1

Publicado: 29 de jun. de 2012

Opciones

My screen is dark after digitizer repair

i attempted to repair my digitizer and though it does come on, it is very dark

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 2

3 comentarios

One of the Common pitfalls / issues is that the Back-light fuse blows..

Yes there is a fusible link that can blow / burn out.

If the Digitizer / LCD is removed with the power on etc.

Obviously try the DFU or boot method first, but two out of two Ipad 2 have done this on me recently.

Google it...

I have had two do this recently.

Worked with a broken Digitizer, then pulled apart and replaced, and obviously disconnected the LCD.

And low and behold op comes a very dim, if visible at all display..

Suggest you look at the You Tube clips and decide if the repair is within you capabilities..

6 de ene. de 2016 - de David

Very simple repair. Hold the power button down until the "Slide To Power Off" screen shows up. Give it several seconds to shutdown then push the Power button to restart it. You get a bright screen again.

16 de sep. de 2016 - de Wesley Hunt

This is the best simple, best answer I ever found in my life in Internet. Thanks a lot and God bless you

12 de feb. de 2019 - de Hercules

Agregar un comentario

8 Respuestas

Solución Elegida

johnkustic @johnkustic

Rep: 943

4

2

1

Publicado: 9 de jul. de 2012

Opciones

You need to do a hard reset. Hold down power and home button for 20 sec.

Hope it helps.

Fue útil esta respuesta?

Sí No

Puntuación 12

8 comentarios:

Lifesaver Thanks

29 de ago. de 2014 - de Kaeyla

@johnkustic you're a clever one! I was about to believe I need to replace my back light! Thank you a lot!

27 de jun. de 2015 - de reynanparico

my ipad is brand new not even turnd on yet but i press the home button and it turns on but sosososo dark almost black and it speeks to me but it says SCREEN LOCKED wat should i do ?

28 de jun. de 2015 - de boo

Good grief! That scared me big time. Thanks for the tip - worked like a charm.

26 de sep. de 2015 - de Joe Shaw

You the man. I too was a little worried there until I tried your fix.

3 de feb. de 2016 - de Trevor Judge

Mostrar 3 comentarios más

Agregar un comentario

One of the Common pitfalls / issues is that the Back-light fuse blows..

Yes there is a fusible link that can blow / burn out.

If the Digitizer / LCD is removed with the power on etc.

Obviously try the DFU or boot method first, but two out of two Ipad 2 have done this on me recently.

Google it...

I have had two do this recently.

Worked with a broken Digitizer, then pulled apart and replaced, and obviously disconnected the LCD.

And low and behold op comes a very dim, if visible at all display..

Suggest you look at the You Tube clips and decide if the repair is within you capabilities.. — David
Very simple repair. Hold the power button down until the "Slide To Power Off" screen shows up. Give it several seconds to shutdown then push the Power button to restart it. You get a bright screen again. — Wesley Hunt
This is the best simple, best answer I ever found in my life in Internet. Thanks a lot and God bless you — Hercules
@johnkustic you're a clever one! I was about to believe I need to replace my back light! Thank you a lot! — reynanparico
my ipad is brand new not even turnd on yet but i press the home button and it turns on but sosososo dark almost black and it speeks to me but it says SCREEN LOCKED wat should i do ? — boo
Good grief! That scared me big time. Thanks for the tip - worked like a charm. — Joe Shaw
You the man. I too was a little worried there until I tried your fix. — Trevor Judge