Saltar al contenido principal

Modelo A1224 / mediados de 2007 y principios de 2008/2, 2,4, o 2,66 GHz Procesador Core 2 Duo

Preguntas 548 Ver todo

Installing a HD in optical drive bay

I have an old iMac 20" (EMC 2133)

I'd be interested in removing the optical drive and replacing it with a small SSD to run OSX on. I know this can be done with on a Mini, but I found no info on whether or not this can be done at all on my iMac model.

Any info would be appreciated.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

5 Respuestas

Solución Elegida

Replace it just like you would a normal hard drive. Here's how: Reemplazo del disco duro del iMac Intel 20" EMC 2133 y 2210

UPDATE

Sorry, I missed that. Here's what to use: iMac & Mac mini Dual Drive Enclosure

Imagen de iMac & Mac mini Dual Drive Enclosure

Producto

iMac & Mac mini Dual Drive Enclosure

$19.99

Fue útil esta respuesta?

Puntuación 3

2 comentarios:

Good to see you back. +

- de

Sure - I understand that the procedure to get to the ODD and HDD are similar.

Nevertheless, I am going to need a caddy of sorts to house the SSD where the SuperDrive used to be, or not? What sort of caddy might I need?

And, is the connection SATA or PATA for the ODD of a Mac A1224?

Thanks

- de

Agregar un comentario

It won't work. The early 2008 iMac used an ATA connector for the Superdrive... not a SATA one. Sorry...

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

I just took my 2007 20” iMac apart to do this with a caddy similar to the one recommended above and this won’t work because the connector, as noted by Lawson above, is different.

Block Image

(optical drive is below, ssd caddy above).

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Yes, the top one is SATA. The bottom one is ATA 100, a much slower interface, which is what pre-2009 iMacs use in the dvd slot.

- de

Agregar un comentario

Hello Mayer, I just wanted to make sure that the "12.7 mm SATA Optical Bay SATA Hard Drive Enclosure"

works on the Early 2008 iMac. It only lists MacMinis as being compatible.

If it does, I would like to use it to install a SSD.

Thanks in advance.

Fue útil esta respuesta?

Puntuación 0

2 comentarios:

Just to be sure (none of the adapters are listed for iMac) I would contact iFixit directly and ask them. Here's where to do it: http://www.ifixit.com/Info/contact

- de

I just sent them a message, thanks.

- de

Agregar un comentario

Did you ever get an answer if this would work?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Valerio estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 6,013