Saltar al contenido principal

iPhone de 4 pulgadas lanzado en marzo de 2016 con especificaciones de hardware similares al 6s. Disponible en Plata, Gris espacial, Oro u Oro rosa con opciones de almacenamiento de 16/64 GB. Modelos A1662 y A1723.

Preguntas 1049 Ver todo

Always has "Could Not Activate iPhone" error

As stated above, it's getting this error every time you try activating it, either via local or iTunes activation. Various software resets etc have all been tried. CDMA based unit. Some techs suggested the SIM slot could be damaged. I'm looking for advice what the actual issue is called in the repair world, and if anybody knows a good tech to help with it locally in South Bay Area / San Jose, CA, or via mail order since it's somewhat more involved than a typical phone repair would be.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

3 Respuestas

Respuesta Más Útil

Use 3UTools and check if the IMEI is being displayed on there. If it is not then the issue is related to the baseband circuit area which can only be fixed by microsoldering.

iPad Rehab should be able to help you out, not sure where they are located in.

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario

SOLVED!

I had the same problem just let your phone completely die until it gets to 0% and then charge your phone and then wait for it to turn on and it should be at your normal lock screen again and it should be working fine.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Text copy replacement and email are waaaay tooooo smiiiiiiiiiiiiiilllllllllleee

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Matthew Hall estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 677