The Samsung NX1000 is a digital smart camera that was released April 2012

Preguntas 15 Ver todo

How can I connect my Samsung NX1000 Camera to my Smartphone now?

Since Samsung Remote View Finder and Samsung Mobile Link Apps are already not available from Google Play Store, what mobile Application can now be used to connect my Samsung NX1000 Camera to my Smartphone (Samsung Galaxy S7 Edge)?

I tried to install the latest Samsung SMART CAMERA App, but it is not working with my NX1000 since as per App Description: "You can only connect to Samsung cameras manufactured in 2013 or later. ( DV150F, ST150F, WB200F, WB250F, WB30F, WB800F, WB350F, NX300, NX300M, NX30, NX mini, Galaxy Camera, Galaxy S4 zoom, Galaxy NX )".

Was the feature to connect to a Smartphone now useless just because this has been manufactured and released earlier than 2013?

Any help is much appreciated.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1
Agregar un comentario

2 Respuestas

Solución Elegida

Hi,

Here are the 2 apps you mentioned.

Mobile Link

Remote Viewfinder

Download them to a PC and then transfer them via USB to the phone. Remember where you downloaded them to in the phone.

Enable Unknown Sources setting in phone for app installation.

Use File Manager app (or equivalent) in phone to locate file(s) and tap to install them.

When both apps installed disable Unknown Sources setting

Fue útil esta respuesta?

Calificación 3

Comentarios:

To be clear about @jayeff suggestion, you will likely need to find the older version to work with your camera, however his suggestion should fix your issue.

por

Hi @avanteguarde ,

Don't doubt you but how old is old?

One is dated 2015 and the other 2013

por

Very good question. NX1000 was released in 2012. (This is not an answer. I really don't know.)

por

Hi @jayeff , I just would like to thank you for your help!

I did what you advised me to do so, and I tested them okay and perfectly working fine! :)

Thanks a bunch!

por

Hi @leika ,

You're welcome.

Glad it worked.

Cheers

por

Agregar un comentario

Hello! Glad to know you were able to get your NX1000 connected to your phone again.

In my case, I upgraded the firmware of my NX1000 to the latest version (1.15), so the solution to download the APKs for MobileLink and RemoteViewfinder did not work. My NX1000 would prompt me to download the Samsung SMART CAMERA App, but when I do, the app is unable to recognize my camera even with my phone connected to the camera's WiFi.

For those in the same situation as I am, here is what worked for me:

  • Download and install THIS version of the Samsung SMART CAMERA App (Version 1.1.9)
  • Switch to WiFi mode on your NX1000.
  • Choose which feature you want to use (MobileLink or Remote Viewfinder)
  • Connect your phone to the WiFi of the camera
  • Open the Samsung SMART CAMERA App and starting searching for camera

Then just follow the usual steps on either your camera screen or phone screen.

Your NX1000 should now be recognized by your phone, and you should now be able to use your WiFi features like before. Hope this helps!

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Añadir tu respuesta

Leika Obero estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 20

Últimos 7 Días: 110

Últimos 30 Días: 576

Todo El Tiempo: 2,425