Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

Preguntas 350 Ver todo

change screen then touch ID and 3D Touch can not work

my I7+ was water damage(old one) so I bought a used I7+ (new one)for replace

because the new one had a crack on the screen

so I change my old one's screen to the new one.

after change screen, touch ID(which is old one's touch ID ) didn't work and my new one's system shows touch ID has issue and will not working

then I though it's because I forgot change touch ID either, so I change touch ID from old one to new one (which is pair with the new one's CPU) but same thing still happened.

there has any thing i can do to get my touch ID back to work?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 3

Comentarios:

If you can microsolder then yes you can do the job. You will also find solution here on ifixit.

por

Agregar un comentario

2 Respuestas

Respuesta Más Útil

Looks like the logic board failure. Here is how to resolve the touch ID problem:

How to replace the touch IC on the home button

Fue útil esta respuesta?

Calificación 4
Agregar un comentario

Try with a new screen (could be defective) then you try with the old screen.. If not look for damages on the home button.

The button might be damaged and cannot be repaired without soldering.

Iphone 7 home buttons cannot be replaced

Fue útil esta respuesta?

Calificación 0

Comentarios:

In my case your answer works! Thanks for suggestion!

por

Agregar un comentario

Añadir tu respuesta

paulluo estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 16

Todo El Tiempo: 135