Repara tus cosas Comunidad Tienda

Modelo de mediados de 2012, procesador A1278 / i5 a 2,5 GHz o i7 a 2,9 GHz.

Preguntas 1624 Ver todo

Opciones

Need to re-solder some Resistors & Capacitors - Water damage

Hello, my friend gift me her MacBook Pro mid 2012 13" water damaged.

(Magsafe blinking light - no power on)

I have checked and cleaned the logic board but there are missing the following:

  • R 5369
  • R 5099
  • R 5053
  • R 5076
  • C 4905
  • C 4910

Where can I buy ? How can I understand the value of parts?

Thanks

Update (11/07/2017)

Also missing - ARE THEY REALLY NECESSARY?

  • R 5339
  • R 5349
  • R 5290
  • R 5001
  • R 5024
  • R 5023
  • C 7408
  • C 7414
  • C 7415
  • C 7416
  • C 5520
  • R 5021
  • C 7419
  • C 7418
  • C 1675
  • C 1673
  • C 1674
  • C 1671

How can this system have worked if all those parts are missing?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Those parts are there for a reason. You can do without some of those capacitors but you NEED all the resistors! You can get the values on the schematic but it would be better to buy a donor board to steal the components off of. Look for your 820- number but I already know yours is a 820-3115 and get one from china. They are cheap then just steal what you need off the other board. You will need a hot air station and a microscope.

Fue útil esta respuesta?

Sí No
Puntuación 3

1 comentario:

Thank You so much :)

- de

Agregar un comentario
Respuesta Más Útil

Opciones

download this schematic https://mega.nz/#!eggVQTSQ!h-bKyiA8hM_ka.... open it with acrobat reader dc and it will let you search for the components and tell you the values

Fue útil esta respuesta?

Sí No
Puntuación 4

3 comentarios:

Thanks for fast reply!

I have booted this Mac two days ago ( in SMC bypass). And it has Booted normally after I had used a new magsafe. But just one normal boot - now I have blinking Magsafe led and no Power.

Is it possible that my MBP model don't need all those missing capacitors?

Thanks

- de

did you try disconnecting and reconnecting the battery

- de

yes, also changed Magsafe and DC In Board. Tried any key combination and Smc reset via command line (when I was able to Boot via Smc bypass)...nothing.

- de

Agregar un comentario

Añadir tu respuesta

LORIS GIAMMARINO estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 145