So, my Mac Pro (13.3 – Model A 1238) was totally wet one morning. There was a pool of liquid under it, and when I lifted it, a lot of liquid came pouring out from left side contact holes. Has anyone experienced anything like it? Took it immediately to authorized service: “Totally damaged. Liquid leakage. Impossible to repair. ” Thank you! Maria Francisca
Es esta una buena pregunta?
Rep: 3.5mil
6
7
2
Repair is most defiantly possible.
Authorized repair often is clueless about these devices.
If you have a small phillips screw driver, Please flip the laptop over and unscrew the bottom cover. When this is done, please unplug the battery. When that is done, We are going to want to take that logic board out and clean it really well with isoproyl alcohol. You can do this trust me! It's not that diffficult!!
Here are some guides on how to do that. You will need a torx screw driver to take the board out.
Remplazo de la Placa Lógica del MacBook Pro Unibody Mediados de 2012 de 13"
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 103
1 comentario
Ediciones Satori let's see if @reecee or @tcrs_circuit can help you with this. Don't give up just yet. Let the gurus guide you....
- de oldturkey03