Saltar al contenido principal

Modelo A1312 / Mediados de 2011 / Procesador Core i5 de 2.7 & 3.1 GHz o Core i7 de 3.4 GHz

Preguntas 708 Ver todo

LEDs 1 and 2 light no chime... next steps.

This is my personal go to iMac, has everything I need. Stock except for SSD (installed more than a year ago) and GPU was replaced 2 years ago under warranty when the gray vertical bars appeared.

Was using this computer and it just went to light grey screen. Tried to reboot nothing, no chime just HD and DVD spun... and of course fans.

Opened up first two LEDs light when power is installed and power button pushed.... that’s it. After about a minute the fans go to high speed. Not an iMac experienced guy, please offer suggestions.... bought a new 27” but sent it back after thinking of the $2700 it costs, and in truth not that much better then my i7.

Thanks in advance!

Ray

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1

3 comentarios:

Did you swap the HD for the SSD or add it as a second drive?

- de

Sorry for the delay in responding...

It is a second drive.

- de

Reconnect the display, and this time press and hold the T key to get into Target Disk Mode, are you able to get the FireWire and Thunderbolt Icons to show on the screen?

- de

Agregar un comentario

1 Respuesta

Did you get this resolved? I’m having the same issue

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Ray worsham estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 58