Saltar al contenido principal

El primer modelo de iPhone, modelo A1203 con 4, 8 o 16 GB de capacidad y una parte posterior de aluminio. La reparación requiere una cantidad significativa de destreza, y puede requerir un poco de soldadura.

Preguntas 224 Ver todo

Sourcing parts from ten years ago

I need a display for an iPhone 1. eBay and Google bring me results for newer phones. Any ideas? I know it's super difficult to find these nowadays, and how they're worth a lot

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2
Agregar un comentario

1 Respuesta

Solución Elegida

Is this what you're looking for?

http://www.ebay.com/itm/Apple-iPhone-2G-...

Fue útil esta respuesta?

Puntuación 3

5 comentarios:

Yes! Smiley face! A bunch of thank yous!!!!!

- de

I've been interested in learning how to handle these older devices safely... I've heard they're fairly toxic inside. Do you know what kind of steps are required to go about a repair safely?

- de

Well you could follow this guide

iPhone 1st Generation Display Assembly Replacement

What do you mean by toxic?

- de

And that only has iPhone 3/3GS

- de

I've read that phones, especially older ones, have components that are dipped in chemicals for one reason or another which are toxic. http://www.dailymail.co.uk/sciencetech/a...

This article shows some of those chemicals.

- de

Agregar un comentario

Añadir tu respuesta

iMedic estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 6

Todo El Tiempo: 279