Saltar al contenido principal

Unibody de aluminio de 13", procesador Core 2 Duo de 2.0 o 2.4 GHz.

Preguntas 573 Ver todo

Won't power on after RAM upgrade

Hi,

I upgraded the RAM in my 13" 2008 unibody MacBook, and it doesn't turn on.

I put in the original RAM sticks and the problem persists

Pleas help if you know what to do

Update (09/15/2017)

Ok here are a few pictures

Block Image

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

This doesn't sound good :-{

We really need to see a good set of images of what you have now. Take a picture with the RAM modules in place take the top one out, and take another. These need to be tight in focus shots of the RAM slots so we can see the alignment of the modules. In addition take a snap of,the modules labels showing us Set A and Set B that way we can verify what you have.

Compose a new answer and paste them into it and when you save it it will ask you if you want to update your question say yes.

Fue útil esta respuesta?

Puntuación 0

3 comentarios:

I added a few pictures to the question

- de

@dorito - the modules appear to be correctly seated so I don't think that your issue. Are you sure you got the correct modules?

Was there any clues beforehand that could be the real issue here? Basically was the system running without any problems.

- de

The computer was working fine, except for the occasional stutter.

- de

Agregar un comentario

Añadir tu respuesta

Luca estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 158