Rep: 898
13
6
1
The speaker is plugged in using the cable that came with the device. The SoundTouch does not appear to be receiving power, and none of the lights will turn on. Can this be fixed?
Es esta una buena pregunta?
Rep: 898
13
6
1
This may be because the cable itself has been damaged or frayed. Inspect the cable for any signs of wear.
Also try connecting the charging cable and speaker to a different outlet to ensure that it is either the speaker or the cable that are the problem.
Also check the cable port on the speaker for any dirt or lint that may be trapped inside and preventing power from reaching the speaker.
The port can be cleaned with a compressed air duster if this is the problem.
If all else fails, the charging port itself may be damaged and need replacement.
For more information, see the Troubleshooting Guide.
Fue útil esta respuesta?
One more thing I. Oticed:
I bought a AC cable that has a 90 degree plug and it didn‘t work as well when I noticed that the plug itself was to short. So try to get a straight plug and push it inside troughly.
Mike
Fue útil esta respuesta?
does my ptbt peavy potable speaker has to be turned on off to charge
Fue útil esta respuesta?
When I plug My A2 lenrue Bluetooth speaker in to charge, a red light flashes and then nothing else. No lights. I've tried different cords and the UBS wall blocks and different plug ins. Is my speaker done for?
Fue útil esta respuesta?
My pathfinder 4 no power it’s been charging for over a day… nothing
Fue útil esta respuesta?
Ultimas 24 horas: 2
Ultimos 7 días: 21
Ultimos 30 días: 66
Todo El Tiempo: 8,159
1 comentario
Peut-on avoir le renseignement technique pour suivre / réparer l'alimentation (power supply) du soundTouch 10. Cela suppose sans doute le démontage du boitier.
- de Robert KLEIN