Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

Preguntas 1393 Ver todo

iPhone 6S home button and touch ID not working after screen replacemen

Hi, I've been repairing phones for a while. I repaired an iPhone 6S screen and attached the original home button to the new screen. However the first time I plugged it all in the home button worked but not the touch ID. I then unplugged everything to get the touch ID working, re- plugged the home button cables and now neither the home button nor the touch ID is working. Ive plugged everything in multiple times since. No difference. Any ideas? Also- the home button does seem to press down quite far however the screws are in as tight as they will possibly go and I'm not sure that that would affect anything? Any ideas? Thanks! :)

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 5
Agregar un comentario

2 Respuestas

Respuesta Más Útil

I would try a new screen for starters. sometimes the ribbon cable behind the plate is bad in the aftermarket screens

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

I would recommend trying a different screen on the device, it might be a bad home button cable on the screen.

If it doesn't work on a different screen then check the button flex for any damage, if it is damaged then you will need to replace the button but you will lose Touch ID permanently

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Añadir tu respuesta

Cara estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 14

Últimos 30 Días: 52

Todo El Tiempo: 349