Rep: 35
1
Had a lightning storm last night and TV won't come on.. red standby light stays on and I can't power on with control or panel... There is also a clicking noise when plugged into wall circuit coming from power supply plz help
Es esta una buena pregunta?
Rep: 782mil
1.1mil
893
2.3mil
@jrog22 time to unplug it for a while and see if it resets. If that does not work, you will have to remove the back of the TV and take a look at the power board. Start with the No Power Troubleshooting for this model
and check to see if you have the proper voltage on the board
Of course, you also want to make sure that all the fuse on the board show continuity. Post some images of your boards with your question so that we can see what you see. Use this guide for that.
Fue útil esta respuesta?
Ultimas 24 horas: 1
Ultimos 7 días: 2
Ultimos 30 días: 7
Todo El Tiempo: 2,874
3 comentarios
@jrog22 the red standby light stays lit, no change, no blinking?
- de oldturkey03
this is happening to my tv except the power goes on just no picture or sound just the clicking noise. I tried unplugging and still not working. Any suggestions, thinking I need to buy a new one?
- de jojo
I have the same model TV. The picture intermittently doesn't come on, but does have sound. Can you please provide a repair manual for the LG 50PT350?
- de richguard