TI 84 Calculator got wet from water. Won't turn on.
Changed batteries but won't turn on. What can I do?
Es esta una buena pregunta?
Puntuación
2
373546
1 Respuesta
Solución Elegida
Rep: 221.4mil
15
289
806
Try these steps...
- Open your calculator and remove the logic board
- Inspect the logic board, especially around the connectors and look for corrosion.
- Inspect both sides of the board.
- Put your board in a container with >90% isopropyl alcohol and let it sit for a while.
- Use a soft brush, like a toothbrush and lightly brush away any corrosion you see.
- Rinse in alcohol and repeat.
- Let it air dry for a day.
- Re-assemble and hope for the best.
Fue útil esta respuesta?
Puntuación
3
