Rep: 37
3
I need help to repair the charging port
but the problem is the board damaged when the charging port brooked as the attached photo https://www.facebook.com/photo.php?fbid=...
the lead welding doesn't stick to the board
Es esta una buena pregunta?
Rep: 781.6mil
1.1mil
893
2.3mil
mohtraxx, looks like you are not using enough flux, and an iron that is to big. If not sure how to properly attach it, I'd suggest you send it somewhere to get it soldered before you lose the solder pads as well.
Fue útil esta respuesta?
Thank you oldturkey03
The problem is whil I removed the old port the bins removed with copper pads on board
the outside pins came off with the pads? Post an image of your connector as well with your question
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 2
Todo El Tiempo: 155
