Burned resistor on GPU
My quastion is is it possible to replace resistor on a new graphics card it's called R47 thx
MSI GTX 970
Es esta una buena pregunta?
Puntuación
1
232421
2 Respuestas
Solución Elegida
Rep: 15.1mil
13
39
16
Of cause you can. before replace it check the reason to burn it, check upper side MOSFET whether short circuit or not. This kind of result i have observed in over clocked GPUs. :-) keep in mind to check R22 also before powering up the graphic card. Cheers!
Fue útil esta respuesta?
Puntuación
5
Rep: 782.2mil
1.1mil
893
2.3mil
I am certain that by now you either have it fixed or got a new card. Anyhow, this answer is just for completion sake. For your Video card the reference designator R47 is a 56 Ohm 5% resistor in a 0402 package.
Fue útil esta respuesta?
Puntuación
1
1 comentario
Hi there,
Was reading this thread and i seem to have a burned R47 on my Sapphire RX480 8gb.
Its been running a custom bios for about 9months thus being overclocked.
The card was microstuttering for some time already and since last dustout the card wouldn't boot and it showed me a black spot and a cracked R47 near the 6pin power connector.
Any ideas on what to check here before i just replace the Inductor?
- de Robin Hak