Repara tus cosas Comunidad Tienda

Preguntas 2522 Ver todo

Opciones

Auto Brightness doesn't work after replacing the screen.

I bought the Screen with everything included. I followed the guide to the letter. Today I noticed that the auto brightness feature doesn't work anymore. I can adjust the brightness manually but not automatically. The front camera works, and I know the sensor works because when I am on a call the screen turns off when close to my ear. Did I do anything wrong during installation or is my replacement part faulty?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 4
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Hi Giancarlo,

You need to disconnect then re-seat the screen assembly.

If this doesn't help, you need to get a new complete front camera flex cable (or even much better: get the one from your old screen), and install it using this guide.

If the above doesn't help, let us know, to explore other causes such as problems with or damage to the logic board during previous manipulation.

Imagen de iPhone 5 Front Camera and Sensor Cable

Producto

iPhone 5 Front Camera and Sensor Cable

$4.99

Fue útil esta respuesta?

Sí No
Puntuación 4

1 comentario:

Hi, and thanks to all of you. I switched the cable from my old screen and now the new screen works perfectly. Problem solved.

- de

Agregar un comentario

Opciones

No the sensor does not work. Proximity and ALS are two separate sensors.

You either tore the flex cable, damaged the logic board or didn't connect the connector well.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

Ok so in your opinion what do I need to do now to fix it? Get another screen?

- de

Agregar un comentario

Añadir tu respuesta

giancarlolugo estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 7,601