Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

Preguntas 184 Ver todo

Black and red lines down iMac screen after connecting LVCD & VSYNC

so after swapping out the HD with a SDD - i connected the LVCD and VSYNC cable back up. But one problem the monitor displays a thick black line with a red line down the screen. If this is any useful - i took a screen shot but did not see it on the image. I guess i need to know whether to get new cables, buy a new screen, ect. Thank guys. looking forward to the help. I can provide images if that'll help.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 5

Comentarios:

Hi there did you sort the screen because it just hapened to me

por

I have same problem, was this resolved? how?

por

Did anyone get this resolved? I also just replaced my HD and now have a 1" black bar on the screen.

por

I have the same problem I used the pizza cutter wheel sold by ifixit and now I have 2 black bars. I'm not sure which cables to replace

por

Agregar un comentario

1 Respuesta

Respuesta Más Útil

This may be on an Apple recall. Please give us your serial number so I can check it out.

Fue útil esta respuesta?

Calificación 1

Comentarios:

d25k71lxdnmp

por

Agregar un comentario

Añadir tu respuesta

Jason Han estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 511