Saltar al contenido principal

Modelo A1278 /Procesador 2.4 o 2.66 GHz Core 2 Duo de mediados de 2010

Preguntas 794 Ver todo

Subwoofer connector ripped from logic board

Hi,

I was replacing my optical drive with an SSD but when I was disconnecting the subwoofer connector from the logic board it broke :(

One of the four pin of the connector came off so I can't solder it on the motherboard again.

Can anyone tell me the name of that connector so maybe i can buy it and re-solder it on the motherboard.

Thank you

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
1 comentario

alessiorossotti, give us your computers serial number. This will help us to identify which logic board you have and then possibly to identify the right connector.

- de

Agregar un comentario

2 Respuestas

Solución Elegida

alessiorossotti, that connector is a Molex 78171-0004. It is available at places like this. More information about the connector can be found on here. Hope this helps, good luck.

Fue útil esta respuesta?

Puntuación 3

1 comentario:

Found the part at digikey.com They sell this connector in one (1) unit up to a full roll of 4500 units. Very helpful!!

- de

Agregar un comentario

Have the same issue...but the whole connector came off. My macbook pro is not starting. Can I troubleshoot it that way? Won't start even in safe mode...

Fue útil esta respuesta?

Puntuación 0

1 comentario:

Best to create your own question with your system info as well posting a few pics so we can see the damage. This is a very old question.

- de

Agregar un comentario

Añadir tu respuesta

alessiorossotti estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 444