The Kenmore Elite HE3 is a washing machine by Kenmore.

Preguntas 581 Ver todo

F Code on Machine, wont drain

I an getting a F Code, just F no numbers. The clothes are soaked. I unplugged the machine for an hour and it hasn't changed anything. please help me fix this.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 6
Agregar un comentario

5 Respuestas

Respuesta Más Útil

The cold water goes through a mesh screen and often gets clogged. The code usually goes off during the begging of the rinse cycle or at the end. This is when the cold water is most commenly used. YOu have to clean this screen. This is the second time we have had to clean it. The first time with an appliance tech, which cost us close to $100 to do. Now, we will do it ourselves. You just find open up the front, take out the screen when you find it and either clean it with vinegar water or our service tech used muriatic acid.

Fue útil esta respuesta?

Calificación 3
Agregar un comentario

Did you try pushing/holding the pause/cancel button and then pushing the drain cycle setting button? That is what I did and the washer drained and completed the cycle. The clothes are fine. I don't know what is going to happen next time though.

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

id go with cleaning of the filter ...if the front wont do it >>>>I hear there's one also in the back >>>????

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Update to previous response, the error code is a little tricky to read it displays the "F " first and then alternatively flashes the second part of the code like "06" which you may mistaken for how many minutes are left. A common code for your issue might be F06 when combining the two parts of the code. A washer stopping just before the high spin cycle could indicate a MCU board issue, bad connection to the board in the top of the machine, bad connectors or even a motor issue. Having the correct code will help narrow down your particular issue.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

$316.66 to replace drain pump / motor assembly is a bad omen because of the 666.

Sears Kenmore Elite model 42822 purchased new in 2003 cost around $1000.

Chat with Sears is awesome. Here is a link to replace part yourself:

http://www.searspartsdirect.com/repair-g...

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Susan estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 24

Últimos 7 Días: 148

Últimos 30 Días: 712

Todo El Tiempo: 33,616