Repara tus cosas Comunidad Tienda

Bose QuietComfort 35 Earpad Replacement

Introducción

With time and regular usage, damage from wear and tear is inevitable for over-ear headphone earpieces. Although Bose is known for long-lasting technology, their ear pads are known to peel after a short period of time. Constantly replacing them with low quality third-party ear pads or replacing them through Bose can be costly and wasteful. Through this repair, you can create custom long-lasting ear pads.

Qué necesitas

  1. Bose QuietComfort 35 Earpad Replacement, Earpad: paso 1, imagen 1 de 3 Bose QuietComfort 35 Earpad Replacement, Earpad: paso 1, imagen 2 de 3 Bose QuietComfort 35 Earpad Replacement, Earpad: paso 1, imagen 3 de 3

    • Reach a thumb under the damaged foam earpad and pull to remove from headphones.

    Editar

  2. Bose QuietComfort 35 Earpad Replacement: paso 2, imagen 1 de 3 Bose QuietComfort 35 Earpad Replacement: paso 2, imagen 2 de 3 Bose QuietComfort 35 Earpad Replacement: paso 2, imagen 3 de 3

    • Locate the plastic oval ring attached to the foam ear pad.

    • Gently pull apart the plastic ring and leather fabric until separated.

    Editar

  3. Bose QuietComfort 35 Earpad Replacement: paso 3, imagen 1 de 3 Bose QuietComfort 35 Earpad Replacement: paso 3, imagen 2 de 3 Bose QuietComfort 35 Earpad Replacement: paso 3, imagen 3 de 3

    • Rip the leather exterior until green foam is visible.

    • Remove green foam.

    • Dispose of damaged leather.

    Editar

  4. Bose QuietComfort 35 Earpad Replacement: paso 4, imagen 1 de 3 Bose QuietComfort 35 Earpad Replacement: paso 4, imagen 2 de 3 Bose QuietComfort 35 Earpad Replacement: paso 4, imagen 3 de 3

    • Print the linked pattern.

    • Cut out the pattern using the solid black lines.

    • Trace the pattern onto the new leather.

    Editar

  5. Bose QuietComfort 35 Earpad Replacement: paso 5, imagen 1 de 2 Bose QuietComfort 35 Earpad Replacement: paso 5, imagen 2 de 2

    • Cut out the leather following the traced lines.

    Editar

  6. Bose QuietComfort 35 Earpad Replacement: paso 6, imagen 1 de 2 Bose QuietComfort 35 Earpad Replacement: paso 6, imagen 2 de 2

    • Using the pattern as a guide, mark holes on the smaller donut with a pencil

    • Punch holes with the leather punch tool

    Editar

  8. Bose QuietComfort 35 Earpad Replacement: paso 7, imagen 1 de 3 Bose QuietComfort 35 Earpad Replacement: paso 7, imagen 2 de 3 Bose QuietComfort 35 Earpad Replacement: paso 7, imagen 3 de 3

    • Align the smaller donut on top of the larger donut

    • Make sure the leather right sides (the side of the leather you want to show) are facing each other

    • Using a thread and a needle, sew the two donuts together at the center of the donut using a whip stitch

    Editar

  9. Bose QuietComfort 35 Earpad Replacement: paso 8, imagen 1 de 2 Bose QuietComfort 35 Earpad Replacement: paso 8, imagen 2 de 2

    • Turn the donut inside out

    • Make sure the leather right sides (the side of the leather you want to show) are facing away from each other

    Editar

  10. Bose QuietComfort 35 Earpad Replacement: paso 9, imagen 1 de 3 Bose QuietComfort 35 Earpad Replacement: paso 9, imagen 2 de 3 Bose QuietComfort 35 Earpad Replacement: paso 9, imagen 3 de 3

    • Buff the outer edge of the small donut with a nail file

    • Glue the outer edge of the small donut with fabric glue

    • Leave the glue to dry for 5 minutes

    Editar

  11. Bose QuietComfort 35 Earpad Replacement: paso 10, imagen 1 de 2 Bose QuietComfort 35 Earpad Replacement: paso 10, imagen 2 de 2

    • Buff the inner edge of the plastic ring

    • Glue the inner edge of the plastic ring

    Editar

  12. Bose QuietComfort 35 Earpad Replacement: paso 11, imagen 1 de 2 Bose QuietComfort 35 Earpad Replacement: paso 11, imagen 2 de 2

    • Attach the plastic ring (glue side down) to the smaller donut

    • Leave to dry for 20 minutes

    Editar

  13. Bose QuietComfort 35 Earpad Replacement: paso 12, imagen 1 de 2 Bose QuietComfort 35 Earpad Replacement: paso 12, imagen 2 de 2

    • Slide the leather ring through the cushion, leaving the plastic ring on the other side

    Editar

  14. Bose QuietComfort 35 Earpad Replacement: paso 13, imagen 1 de 2 Bose QuietComfort 35 Earpad Replacement: paso 13, imagen 2 de 2

    • Apply glue to the edges of the leather donut

    • Put an object in between the donut for a better drying process

    • Leave to dry for 5 minutes

    Editar

  15. Bose QuietComfort 35 Earpad Replacement: paso 14, imagen 1 de 3 Bose QuietComfort 35 Earpad Replacement: paso 14, imagen 2 de 3 Bose QuietComfort 35 Earpad Replacement: paso 14, imagen 3 de 3

    • Fold the leather down to the plastic ring, wrapping around the cushion ring

    • Straighten out the creases in the leather ring

    Editar

  16. Bose QuietComfort 35 Earpad Replacement: paso 15, imagen 1 de 2 Bose QuietComfort 35 Earpad Replacement: paso 15, imagen 2 de 2

    • Use a paper clip to hold the pieces in place while letting glue dry

    • Leave to dry for 20 minutes

    Editar

  17. Bose QuietComfort 35 Earpad Replacement: paso 16, imagen 1 de 3 Bose QuietComfort 35 Earpad Replacement: paso 16, imagen 2 de 3 Bose QuietComfort 35 Earpad Replacement: paso 16, imagen 3 de 3

    • Attach the leather earpads back onto the headphone

    • Apply light pressure to secure the earpads into place

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Documentos Adjuntos

Autor

con 3 otros colaboradores

Johnson Ou

Miembro Desde 02/01/24

298 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

UC Davis, Team 4-2, Andersen Winter 2024 Miembro de UC Davis, Team 4-2, Andersen Winter 2024

UCD-ANDERSEN-W24S4G2

3 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 33

Todo El Tiempo: 78